arronm

Did FORD recently service your car and use diff oil for engine oil.. I recently changed from 15-40 to 10-60 and my oil pressure has increased especially when cold.

that's the one I hit, cut the bead on my tyre $ 250 thanks for coming. You made me think so I went to check my cat ( I have only 75mm clearance 5 inch body) . Luckily it is ok

MYTHOS Beyond the leading edge The maximum expression of Marangoni’s know-how, the result of years of research, of racing, of trials and tests in the most extreme conditions. Mythos represents excellence in performance from all points of view: stability at high speed, grip in the wet, efficiency under braking, manoeuvrability, comfort. More info... Tyre size designation Load index/Speed code 265/30 R19T.L. X.L. (93 Y) 275/30 R19T.L. X.L. (96 Y) 255/35 R18T.L. X.L. (94 Y) 265/35 R18T.L. X.L. (97 Y) 225/35 R18T.L. X.L. 87 Y 225/35 R19T.L. X.L. (88 Y) 235/35 R19T.L. X.L. (91 Y) 245/35 R19T.L. X.L. (93 Y) 235/40 R17T.L. X.L. 94 Y 245/40 R17T.L. X.L. 95 Y 225/40 R18T.L. X.L. (92 Y) 235/40 R18T.L. X.L. (95 Y) 245/40 R18T.L. X.L. 97 Y 215/45 R17T.L. X.L. 91 Y 225/45 R17T.L. X.L. 94 Y 235/45 R17T.L. X.L. 97 Y 245/45 R18T.L. X.L. (100 Y)

That hole cost me a new tyre...

Did I see your car on the back of a TRUCK today?.

Fords recalled the F6 for the clips which when broken made the car difficult to select gears. My box is hard to shift into second until it fully warms up I think my clutch plates are dragging like mentioned above. I think ford should sort this out for you, but if the plates have abuse your on your own. PS- Wait till they give you the standard " Your mat was too high and jamming under the clutch and not giving you full disengagement. Then you take them to the car and show them it has no mats (IDIOTS) ( because you purposely took them out before you took it in as you knew that they would say that)

I thought you bought a boost gauge. Why does it read vacuum. Does your car SUCK.

Best to call APC and Xtreme and see what they have to offer. 90 % of people I know and cruise with have had there car tuned at Xtreme. I would rather not comment on APC.

This is all true , sometimes above 350rwkw you can get clutch slip, it all depends on the power delivery. But as Greenxrt6 says just add the ceramic plates to fix it. I dont know about being light my clutch is quite heavy. Arron

BUY IT NOW! ADD TO CART.

Wait the 4 inch nizpro at $2000 is only around the corner and it will be quiet. Turbo to tail.

It looks like a 10W wire wound resistor. It fools the computer into thinking the car is running cooler like our06T said. I fitted one a month ago but had to remove it as the extra horsepower made the car almost underivable.

Iam interested in this as I to am from WA and have a Duel fuel Ba which I intend to supercharge and not sure on modifications to the gas system. Arron

They sent me 2 maybe because I have 3 fords

Just realized you had an auto. I have seen this problem before, you will find it is the thing connected to the gear shifter on the drivers side.

So are the 5000's good to go for the T? Yes but you will need Ford Premium calipers. Fpv brembo or Fpv premium brembo calipers

Do exactly that bolt on cat back twin 2.5" system in mild steel $400 on Ebay REDBACK. That will be good stock and support well over 300kw tuned.exhaust

Over the last 6 months I have bought 3 sets of mags and tyres and 2 sets of tyres for bob jane cannington they are the cheapest and they can get you any mag or tyre you want.

I intend to fit one when Kev releases it. I will put a electric solenoid into the line so it will only open when the oil passes a certain temperature. Arron

Jack the car up on the passengers side only and pour 4500ml into the fill hole.

Ive only put pictures on a couple times. I had my son do it. Your exhaust sounds good.

I saw your other link and was going to buy these for gauges. Which are the blue / green ones can you give a link so I dont buy them as I want blue/ purple or just blue needs to be 430nm

I thought he asked if they were available and where to get them, I dont think he was after opinions.

Try thisgauges

Just fitted OZgauge to my sons car 3 pod they have a large bezel 58mm but that is still not wide enough to cover the external diameter of the std fpv pod which is 60.2mm. The fpv pod is ribbed internally at 52.5mm diameter. The bezel of the FPV gauges clips onto the front of the std gauge which is made by VDO. Interesting enough I had a vdo gauge in the shed and it fits straight in and the bezel clips straight on . So maybe try VDO. I was going to do the same as you but pole position 3 pod are $105 at the moment so I bought one, and I like old school so Iam fitting autometer gauges. If you want blue the cobalt ones are nice. Arron