hypnodoc

BF2 - R Spec No DSC; TC only.

Your not wrong Shyfrd, guess that's why his workshop was empty and the other one was a 2 day wait. Lots of sharks out there in the ocean.

You can find it for $25/28 a litre in Aus if you look around. Motospecs is a good place to start.

No worries SteveR. Mine stopped the hunting as soon as the Life Guard was put back in. If you want to go to the real stuff Precise or Precision Automatics in Osborne Park are the best for price and service, no new sump included as it was already steel. $530 for full flush and filter usuing Life Guard and fit new heat exchanger (I supplied the heat exchanger) others wanted as much as $850 to just do a dump and half fill.

Well for those interested the squeal is a Flex Plate symptom. I got the Whoooooooooooom Whooooooooooom sound with a vibration this morning around 2000rpm when it was cold, a definate symptom. Off to the XFT hospital on Tuesday morning.

Transmission Squark, mine does the same, apparently it is fixed by putting beefed up clutch plates in it. Some do it some don't apparently it's the G clutch in 3rd, transmission guy told me the next thing is a snapped input shaft. Mine also got louder when the boost was lifted but has done it under load for more than a year but it rarely gets hard time so I have left it. It had Transmax Z in it so I tried a service and full flush with new Life Guard, didn't make any difference.

Mine did the same with Transmax in it. Changd it back to the factory Life Guard 3 weeks ago and the issue is gone, chanes smoother and no hunting anymore

A strange creature these ZFs I'm still trying to find out what makes mine squark (whoop) changing up from 3rd to 4th under power. Had the box flush and replaced the oil with the factory stuff and still get a whoop noise when I gun it through the gears, changes fine when driving normally. I had also had a flash done on it and didn't make any difference, bloody weird.

Yeah they use the savings to put a camera on a lightpole every couple of Kays so they can legally photograph every car going past then bust you if you forgot to pay your rego because you didn't have a sticker to remind you. Its all about survelliance not saving money. Next they will be saying it will save lives. "All of the governments lie to all of the people all of the time".

Some serious looking sound there Spoolax

What a ba$tard to happen to a new Merc. The insurance Co sound like a buch of tossers. I had a crack in the rear bumper of mine, bent the mesh and also cracked the insert. With QBE they gave an OK for an almost 10k repair and replaced the lot without raising an eyebrow. When I asked the assessor if they repair or replace he gave me an indignant look and said we only replace with new parts, personally I thought $500 worth of plastic welding would have made it good as new, but who am I to argue. Didn't lose my no claim bonus either.

Oil is a difficult one. I don't think that because it's dark it is neccessarily a bad thing but from what I could see it does not stand up to heat very well, it made me wonder what it would have been like if I thrashed the car or drove it hard, maybe chugging around at the speed limit works it harder, as Spoolax said he has had no problems with Nulon. Personally I would rather see it all nice and clean under the rocker cover because if it has a burnt coating so do lots of other places in the motor. Two things I have noticed since the flush and change is firstly the turbo wind down bearing noise is a lot quieter, and secondly the car had an intermittant squeaky sound at idle that was similiar to a quiet belt squeal but was coming from low down at the rear of the engine and now that has gone, that may just be a coincidence, but the turbo wind down noise isn't. IMHO I think a good quality 0w 40 such as Mobil 1 or Castrol is a better option. It may cost more but in the end you get what you pay for.

No not usually. This was the first time I had used it in the hope of cleaning up the black mess and staining, but at 34,000 and a change every 5000klm in a car that has barely spun the back wheels and gets a pretty gentle life. I didn't think it would have been necessary.

I completely agree spic. Apart from whatever Ford put in it new for the first 2000klm, the only other oil that has ever been in it was Motul which was very expensive syntrans and I only used it once. I was also surprised by the dirty condition of the oil, but I wonder how many other users have ever removed their rocker cover or reported here what they found. I wouldn't have if there hadn't been a specific thread on Nulon here.

Black crap all around the top of the head and inside the rocker cover, everything was stained black. The car gets driven normally, not thrashed and has new oil and filter every 5000ks and has only done 34,000. The tuner said it looked more like an engine that had done 140,000, called another mechanic over and asked how many ks do you think this has done? Answer, about 120,000. Idled a can of engine cleaner in it for 15 mins and the oil that came out after that was as black as tar. So gave it a new filter and a gutfull of Castrol 0w 40. It seems like the Nulon doesn't handle the heat too well. Guess you get what you pay for.