1400hp vs 700hp axles

[cat007]

Doubt the weight would have any effect on performance with the weight being towards the center, but a before and after dyno would be cool....

[k31th]

having issues... ok, try this: https://www.fordxr6turbo.com/forum/topic/92470-how-to-put-images-in-your-post/

[MR_FG_09]

Sorry never got pics of the 700hp shafts as I was working while the car was having upgrades done but these are the best pics I got I gave Ray a hand to drop the diff then had to go so never seen the shafts or wavetrac before fitting

[SuperTrev]

Where from and how much $$$  for both? Are the 700hp rated ones worth it over the stock ones? Are the 1400hp overkill for most cars?

[MR_FG_09]

Im not sure what they are worth nowadays no doubt alot dearer like everything now but you can contact Ray at Western Suburbs Diffs in Brissy he has a Facebook page

[Tom Tucker]

Not much change out of $6k for the 1400hp ones these days I'd say.

The 700hp ones aren't that much cheaper.

They're made by the Driveshaft Shop in the US, but there are a few resellers in Aus.

I got mine from Diff Technics in Sydney 

[SuperTrev]

$6k seems way too expensive! A quick look online and I see them for $240 per side. Are we talking about the same thing? The bottom picture of MRFG09 just above is what I'm after. The half shaft from cv joint to cv joint, not including the hub.

[Puffwagon]

On 31/07/2022 at 9:36 PM, SuperTrev said:

Where from and how much $$$  for both?

 

This is the website you're looking for I think.

[cat007]

And don't forget that's USD too - so convert that plus shipping and you start to get fairly pricey - not $6K pricey but still not quite $240....

[Puffwagon]

Good ole USD, just got shafted recently meself