1400hp vs 700hp axles

[Bulletime]

I found the same on one I replaced that was leaking it was an absolute pita to change. Nekminit it still leaks [emoji2357]

I noticed inside the rim was scratched and assumed I’d done it given how much of a beach it was to take out but since it was leaking beforehand I think whoever had changed them before me had already scratched it up [emoji17]

[rednose]

700hp ones are actually 1000hp rated and plenty for 99.9% of the falcons on the road.

 

The only reason they were downgraded to 700hp is due to the release of the 1400hp ones.

Edited 12/07/21 01:50 AM by rednose

[MR_FG_09]

that's good to know ive been running the 700hp rated shafts for the last 3 years daily driven & plenty of roll racing events
But I haven broken 1 shaft back when the car had 324rwkw on the baby turbo

[rednose]

On 28/07/2021 at 6:02 PM, MR_FG_09 said:

But I haven broken 1 shaft back when the car had 324rwkw on the baby turbo

Which shaft did you break?

 

Stock one?

[MR_FG_09]

Left outer cv
 

And it was a 700hp rated shaft apparently someone over tightened it im not sure if that is a legitimate issue though or not

[Tom Tucker]

Interesting. I'd not heard of anyone breaking a 700hp one.

I think the CV is bigger on the 1400hp ones

[JETURBO]

Correct, everything is bigger on the 1400hp units 

[cat007]

Does anyone have any pictures of them side by side and also next to stock?

[biddie_fiddler]

I too would love to see photos of the upgraded ones vs stock 

[Tom Tucker]

I do, but having issues with upload.

The CVs are a lot bigger, but the actual shaft is around the same diameter. 1400hp ones are about 30% heavier