LU82

I have shockworks brakes on my fg . 6 pot 380mm on the front and 4 pot 335mm on the rear. Im really happy with them. I think they were around $5500 delivered. That was the middle of 2022.

Good advice. My car only does about 10,000km per year , it's been on e85 for around 5 years. I got 400km out of my last tank.

Yeah standard turbo E85s a good cleaner so loosens any crap you have in the tank.

No , just make sure your injectors and fuel pump are suitable . I had similar mods to you and the car was good for 11.2 @ 124mph on e85 . I'm in nsw and last time I filled up I think it was $1.40L

Get a e85 tune if it's available in your area.

I'm hoping to get to the track in a few weeks , I haven't been for a while. Let me know when you're going and I will see if I can make it down

@MattyP offers still there if you want to take my car for a drive and see what you think of the precision 6235.

Love that AWD g6et , if he brings out a kit I will seriously think about getting one.

Is there anything in the software for boost by gear ?

Suspension . I haven't had wheelspin at the track since having shockworks fitted and running m/t et street radials. 3rd gear burnout and it hooks up all through first. Car has run 10.2 so far.

Can't really comment on wear as I only drive the car on the weekend. Best tyres I've used . I'm still running the factory wheels , 245/35/19. Really happy with the grip they provide . Nice turn in and great straight line grip.

If you're interested in a PW stage 1 stepped cooler for cheap let us know . It's been sitting in the corner of my lounge room for the past year , just haven't got around to selling it .

Have you tried driving the car with that size tyre.? If you haven't , take a drive around the block first and see if the abs cuts in prematurely . You might have to pull out the abs fuse .

Probably better off running 275/40/17

Im LU82 who are you?

Yes I did

Who's this guy^^

Lol . I didn't post that

You can borrow my drag radials anytime.

There shouldn't be any vibrations . Take Chris (Gibson driveshafts) for a drive , see what he thinks.

I went from standard to ns400 pads and t3 rotors . I've been happy with them , feel so much better than standard. Pulls up easy at the end of the 1/4. Still get a bit of brake fade if I push it hard on a tight section of road but work well enough to have fun.

They love doing skids this end of the coast. I had a mate from Sydney come and visit and he couldn't belive the amount of lines painted up the road. E85 at budgewoi United too Matty , nice and close.