neotim
-
Posts
276 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Articles
Media Demo
Everything posted by neotim
-
Awesome. Nah there's been plenty of these meets and no cops have showed up. It's at Rocklea Showgrounds so all on the ovals great venue for it and lots of cars!
-
Might sound a little lame for some of you older lads but anyone keen on heading to the downshift meet next Sat the 1st at 2PM? Be good to get a bunch of fords there! http://www.facebook.com/photo.php?fbid=485906758087348&set=a.150300804981280.27352.138919019452792&type=1&theater
-
And I'm booked in on Monday! lol
-
Yeah well I got 19x9.5 +20 on the rears now with 35mm spacer and almost sits flush with the guard (couple of mil inside). that's pretty much what I want however don't want to run spacers.. Will the 10.5 +12 sit flush in the rear?? As for the fronts don't want to much poke maybe the +22 would be the go
-
Thanks guys.. Looks like I'll go either the +30 or +22 in the fronts. Any Ideas on rears? Will I be safe to run the +12 10.5" rim on the back??
-
Available offsets for 9.5" front is 12, 22, 30 and 10.5" rears 12, 22, 30, 34
-
Hey Guys thinking of doing a swap and getting these exact rims for my ute (FG). I have rolled and flared guards what offset would you recommend for 19x9.5 fronts and 19x10.5 rears? Tyres?? Car is lowered
-
Yeah man! Should quieten it down a little and still sound good
-
Just throw in a hotdog mate. Mine drones a little and I have the same setup as you with the venom cat but mines a manual so probably not as bad
-
Is it true that rear wheel spacers put more load on your rear axle and bearings ??
-
If I could go back I would have got the 3 fin lid. Looks better than the bulge IMO
-
No worries man. It's the single power bulge
-
Such a tough ute! Got any pics of the billet axles and 9inch diff??
-
that's great results without the addition of a high flow cat! Well done mate
-
Hey Tab any details on the cruise yet mate? Sounds like it's gonna be a good night!
-
I've got 35mm ones on the rear of mine pretty much sits flush with the guard. Rims are 19x9.5 +20.
-
Faaark will be a monster after it's done Al !
-
Fg Xr6T Front Bar Plastic Grill Removal?
neotim replied to FGPSI's topic in Interior & Exterior Workshop
Sharp kitchen knife will do the trick -
There are lots out there mate just have a search through some threads. KPM, Herrod, SS Inductions, Process West and Plazmaman all make good kits that sit in the standard position
-
I'll be there
-
Nice work mate. How do you find the Rapid Intercooler? Thinking about upgrading to one of these for mine
-
Fg Mkii Custom Fiberglass Gauge Install :)
neotim replied to fletty's topic in Interior & Exterior Workshop
Pretty sure I saw somewhere that Top End Audio in WA do the pods for the new MKII.. -
4Inch Install "stainless Style"
neotim replied to JETURBO's topic in Fuel System & Induction Workshop
You should be sweet man. I changed my intake straight after I picked it up from the factory and didn't have any dramas. -
Sketching out after seeing on channel 9 news the other night that it has racked up $22,000 worth of speeding fines already since its opening.. Hopefully I wasn't one of them
-
Can anyone confirm whee the speed cameras are exactly in the tunnel? Believe when I went through it looked like they were at the start where the toll cameras were and at the end but correct me if I'm wrong..
