Ralph Wiggum

Air leak from the intake manifold gasket If you leave it long enough it'll go into closed loop fuel control and will calm down They normaly got right @#1 cylinder due to the heat from the thermostat housing

The exhaust housing is cast steel not cast iron. It'll weld fine without pre and post heat but if you have the facilities preheat is the go. Heat it to 200 deg, weld it and then wrap it in heap of old welding gauntlets (you should have plenty being in the trade) and let it cool down at its own rate. Ive done heaps with and without preheat and haven't had one crack yet. The temps the turbine housing gets to in operation is good for normalising and stress relieving the weld once it's in service

Nah install was junk. Will do a proper installation and get it on 72spokes once it's rego'd Basic resto then get it licensed and cruise it.

I don't have a method per sae. I just train them has worked for the last 3 dogs. Might watch Zak George, hopefully he's got some tips on training the kids....

It aint.

Got a new Litte Mate a few weeks ago. She's already settled into the Shed Dog role.

Was changing wiper blades, instructions where unclear so I cut the floor out

As you do when you are bored in June Dat Ass Doe

Yup

Yup

same as previous post. BTR bolts will suit the ZF convertor

Have run a gtx3576 on a 6 boost low mount. Response was exceptional. Great combo in a manual car

Correct, once latched it'll stay off. Id suggest swapping the fuel pump relay with another relay in the engine bay fuse box to see if the fault moves with it. Could also be a poor connection on the pump or simply the pump is politely telling you its on the way out.

Awesome work Gerald

Not for sale buddy

Took the Glitter sh*tter to work. It's be on hiatus for an engine freshen up

https://www.amazon.com/Nicecnc-Aluminum-Cylinder-Replace-2005-2012/dp/B07KXTL4S8 https://malwoodauto.com.au/whats-new/

Introducing my eldest (6yrs old) to Star Wars. He's nearly getting it- "dad, whys baby Yoda big in the star wars movies but not in the show?" "is that dath Vader's dad?" "why is Luke Anikin so big in this movie" "is Padme Princess Liea?" "why is Luke,Darth Vader now?"

At the risk of pointing out the obvious you don't need insulated bulkhead connectors to go through a thermoplastic Pump Module. Double R Ron is the metallologist and will be able to explain why zinc/nickel coated studs/bolts won't be the best conductors (something about surface conduction or something vs a whole conductors) but if I was you I'd get some good old black steel m6 bolts and nuts, install quality crimps and use the black steel bolts to secure them. I use https://www.efihardware.com/products/1593/submersible-pump-bulk-head-terminals to run my TWIN intank 460's but had changed to black steel bolts purely due to the thickness of my fuel tank hat. Buy Aussie Bro lol thickness.

Upgrade time baby. Bw chra

CSYJB/WDYDTYCT X-Over SpoilyBoi .88 AAAAAAAAAAAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRRRRRRRRRRRPPPPPPPPPPPPPPPPPPPPP's

Genuine seal Non Genuine Seal