k31th less WHY; more WOT Site Developer 30,109 Member For: 18y 5m 18d Gender: Male Location: Melbourne Posted 07/06/19 01:55 PM Posted 07/06/19 01:55 PM ahh nice... looks like a slick bit of kit
SelectivePC Member 79 Member For: 8y 27d Posted 07/06/19 02:50 PM Author Posted 07/06/19 02:50 PM Hopefully, if its able to handle what ill be doing too it, should be a great kit. 1
SelectivePC Member 79 Member For: 8y 27d Posted 28/07/19 03:23 PM Author Posted 28/07/19 03:23 PM (edited) Kits together and installed... and was able to retain the factory sub frame, I will how ever need to figure something out to relocate the steering rack. On top of that little issue, a good bit of metal needed to be relocated to fit the larger CD009 tail housing side. Edited 28/07/19 03:24 PM by SelectivePC 1
k31th less WHY; more WOT Site Developer 30,109 Member For: 18y 5m 18d Gender: Male Location: Melbourne Posted 28/07/19 03:30 PM Posted 28/07/19 03:30 PM lookin' good mate. (fixed your video to embed on the forum properly).
SelectivePC Member 79 Member For: 8y 27d Posted 28/07/19 03:30 PM Author Posted 28/07/19 03:30 PM Thank you sir, I over looked that lol.
k31th less WHY; more WOT Site Developer 30,109 Member For: 18y 5m 18d Gender: Male Location: Melbourne Posted 28/07/19 03:32 PM Posted 28/07/19 03:32 PM no worries. just quietly, this is probably one of the best builds going around
SelectivePC Member 79 Member For: 8y 27d Posted 16/12/19 02:23 PM Author Posted 16/12/19 02:23 PM MAJOR UPDATE: So, lots of little work as been going on, not much to post about by themselves, but as a whole its starting too look like a car again. Wanting to make maintenance a easy task, so keeping the motor set easily removable is the goal. Currently without wiring, and fluids this takes 15 mins. New manual brake portioning setup and pedal setup. Also seen there is the FuelTech550 mounted. Turbo setup mounted and mocked for plumbing. Side note* waiting on a new front facing plenum, so getting rid of the over the top setup shown here. Fuel Cell, and rear mount radiator mounted and ready for plumbing. Still need to mount the water pump, has a issue sourcing a pigtail and plug, but all is fine now. And Finally everyone's favorite. Wiring.... So yeah, that's about it for now. Until next time from across the pond!! 5
k31th less WHY; more WOT Site Developer 30,109 Member For: 18y 5m 18d Gender: Male Location: Melbourne Posted 16/12/19 02:30 PM Posted 16/12/19 02:30 PM making solid progress
Box stock T. Member 1,384 Member For: 11y 5m 21d Posted 16/12/19 10:04 PM Posted 16/12/19 10:04 PM 7 hours ago, SelectivePC said: Turbo setup Such a cool build, was getting a worried it was gonna be naturally aspirated, but then the pics above appeared. Worries gone ... Definitely shows this should have been a global platform engine/car combo, ford really missed the target on that side of things. We might still have the barra in production today but as standard kit in some ford ranger raptors. Definitely getting close to firing it up Selective. Nice work buddy.
camo86T Legacy Donating Member 1,810 Member For: 12y 7m 16d Gender: Male Location: SW Sydney Posted 17/12/19 03:10 AM Posted 17/12/19 03:10 AM 5 hours ago, Box stock T. said: barra as standard kit in ranger raptors. ^this... fappitty fap 1 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now