karlp2 Member 81 Member For: 13y 1m 1d Gender: Male Location: Auckland, New Zealand Posted 06/08/16 11:32 PM Posted 06/08/16 11:32 PM (edited) Is a 19" rim, 9" wide with 35 offset okay front and rear on my g6et which is also on super low Springs? A local shop has a set of four that I'm thinking about, probably would have preferred 8.5s on the front but the wheels are a good price Edited 06/08/16 11:34 PM by karlp2
BAXRTUTE Legacy Donating Member 2,639 Member For: 10y 4m 30d Posted 07/08/16 12:27 AM Posted 07/08/16 12:27 AM (edited) What type of look are u after? Tucked in the gaurd? Flush finish? Whats the guard hight from ground to top of arch lowered? 35 offset is standard size so only 7mm wider each side from standard rims fg rims. Google willtheyfit.com as fill in the numbers for a guide Edited 07/08/16 12:31 AM by BAXRTUTE
arronm Dropping a turd Legacy Donating Member 9,520 Member For: 18y 10m 22d Gender: Male Location: Perth Posted 07/08/16 03:38 AM Posted 07/08/16 03:38 AM Your maths sucks. Go stand in the corner for 5 mins then try again
PTR_NITRO_FG Legacy Donating Member 3,214 Member For: 13y 3m 23d Gender: Male Location: NOR Perth Posted 07/08/16 09:15 AM Posted 07/08/16 09:15 AM Did lol. 12.5mm each side (or 12.7 if you're pedantic) 9 hours ago, karlp2 said: Is a 19" rim, 9" wide with 35 offset okay front and rear on my g6et which is also on super low Springs? Stock height 18x9 +29 (yours will sink in 6mm more). It will be close to the front suspension, but should be fine with 245s max. Below has 245/265s.
[THOMMO] Member 94 Member For: 10y 3m 1d Posted 25/08/16 02:28 PM Posted 25/08/16 02:28 PM Anyone got 19x10.5 +32 on the rear of an FG?
Tocchi Sandtrap Motorsport Legacy Donating Member 2,055 Member For: 17y 9m 24d Gender: Male Location: Perth Posted 25/08/16 10:10 PM Posted 25/08/16 10:10 PM Hi. 1
[THOMMO] Member 94 Member For: 10y 3m 1d Posted 26/08/16 12:34 AM Posted 26/08/16 12:34 AM nope yours doesnt count haha 1
[THOMMO] Member 94 Member For: 10y 3m 1d Posted 26/08/16 02:17 AM Posted 26/08/16 02:17 AM new request, anyone with 9.5 all round with +25 or +22 offset, just wanna get a image in my head of the look
discostig Manual mode ________________________ All day, erryday Legacy Donating Member 13,798 Member For: 18y 9m 24d Gender: Male Location: Probably above atmospheric pressure Posted 26/08/16 02:25 AM Posted 26/08/16 02:25 AM Just do it mang 3
OZYWALKER XR50T Legacy Donating Member 2,795 Member For: 13y 4m 16d Gender: Male Location: Western Sydney Posted 30/08/16 12:16 PM Posted 30/08/16 12:16 PM I want to go wider all around, mainly for more grip, more brake clearance and it should look pretty tough.Currently have, front: 18x8.75 +36, 255/40r18. Rears: 18x9.75 +36, 295/35r18 but want to go as wide as possible without having to flare the guards, wouldn't mind rolling/pumping them though.Fronts at the moment have roughly 25mm from the tyre to the guard but biger all room to the upright. Going by will they fit the new setup should be veeery close to the front guards.I'm looking to fit 19x9.5 +20, 275/35r19.Rears should be fine depending on brake clearance 19x11 +45, 325/30r19.Tyre sizes are whats available in invos, would prefer 265 front and 315 rear but invos are usually pretty common.Any ideas/opinions?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now