G6E-T Parts List For +400 Rwkw

[Henz]

Na he doesn't velocity. It's only true if its Jacks car mate.

[stevanford]

Any more info on this "Pete Ps" car ? What turbo, fuel etc is he running ? Is he a member here ?

Edited 29/01/13 12:55 AM by stevanford

[Never had any say Panda]

Na he doesn't velocity. It's only true if its Jacks car mate.

[96ET]

This is my list of parts to get to 400rwkw:

GTX3582R + ported wastegate & flapper mod

4inch turbo side intake

1000cc injectors (I think your 80lbers will be ok)

Surge tank + 044

Bigger Intercooler

Valvesprings

4 inch dumppipe + high flow cat going into a 3.5 inch catback.

Xcal3

Purely on engine mods, I spent close to $9000. Add to that the cost of fitting parts if you can't and tuning the car and that figure will be closer to $12,000

Don't forget that the G6ET does not come with a LSD. A decent tailshaft, LSD and diff bush combo will set you back about $3000. As for the gearbox, once you get to 400rwkw, start saving immediately for a ZF rebuild. It will need one eventually.

As for the fuel system, if you really want 400rwkw, then budget for a surge tank + 044.

Hart Transmissions, Brendale

Just a heads up HART are doing a TrueTrac LSD in my g6e for $1550 fitted.

[Henz]

Any more info on this "Pete Ps" car ? What turbo, fuel etc is he running ? Is he a member here ?

Banned I think. Ba turbo & e85.

[stevanford]

Banned I think. Ba turbo & e85.

Going for mid 10s ?

[_Velocity_]

11.3 with the small FG turbo so with the 35/40 a 10sec pass would be the goal.

He ran the 11.3 with the stock cooler, stock cai (a hole cut out), herrod piping kit, upgraded injectors, a P800 inline fuel pump and no surge tank.

[Henz]

+ valve springs.

[djqc]

My 2 cents on owning a 400kw+ ford:

Be prepared with lots of cash, and your partner will get pretty sick of the speed/noise/cost

[Pazzo]

Nah he's not banned... He's to busy making baby's as just got married...