Tocchi Sandtrap Motorsport Legacy Donating Member 2,055 Member For: 17y 9m 24d Gender: Male Location: Perth Posted 08/08/16 10:19 PM Posted 08/08/16 10:19 PM E85/methanol would leave the intake manifold & engine insides looking brand new minus some milk that disappears once methanol evaporatesIE: 1
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 11m 26d Gender: Male Location: Perth Posted 08/08/16 10:42 PM Posted 08/08/16 10:42 PM Got milk? 3
skidxr6t skids Legacy Donating Member 2,754 Member For: 13y 8m 20d Gender: Not Telling Posted 08/08/16 11:49 PM Posted 08/08/16 11:49 PM ^ just how ralph likes it, boys gone wild!
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 11m 26d Gender: Male Location: Perth Posted 09/08/16 01:04 AM Posted 09/08/16 01:04 AM That picture actually features another well known WA Member. Those who know who it is keep it quiet. Those who don't are free to try and work it out. Let me just say he might be a tad touchi about my posting it....
arronm Dropping a turd Legacy Donating Member 9,520 Member For: 18y 10m 22d Gender: Male Location: Perth Posted 09/08/16 01:28 AM Posted 09/08/16 01:28 AM I didnt realize he liked sausage that much...
Trent0 The Toxic Rocket Legacy Donating Member 574 Member For: 16y 4m 24d Gender: Male Location: Brisbane Posted 11/08/16 09:51 AM Author Posted 11/08/16 09:51 AM (edited) I had the front wheels replaced the other day due to the passenger side front having a split in the wall (first pic). I never took much notice of it but was warned to change them as bigger problems can arise. So I did. Very glad I did! Apparently from a a combo of low tire pressure, federal tires and a pot hole. Inside of the rim I never saw. Also found the drivers side lower control arm ball join has had it so I'll pull out both sides, check the bushes (nolathane) and re- grease it all so she will be like new again. Edited 11/08/16 09:53 AM by Trent0
k31th less WHY; more WOT Site Developer 30,099 Member For: 18y 5m 8d Gender: Male Location: Melbourne Posted 11/08/16 09:52 AM Posted 11/08/16 09:52 AM such a shame to waste all that good quality tread that could be turned into smoke ...
Trent0 The Toxic Rocket Legacy Donating Member 574 Member For: 16y 4m 24d Gender: Male Location: Brisbane Posted 11/08/16 10:45 AM Author Posted 11/08/16 10:45 AM the plan was to use them as skid tires with a video for the boys but the tire guy said that it wouldn't be a good idea with how buggered it was.
k31th less WHY; more WOT Site Developer 30,099 Member For: 18y 5m 8d Gender: Male Location: Melbourne Posted 11/08/16 10:49 AM Posted 11/08/16 10:49 AM as though removing all of the tread is better than doing it on a damaged tyre? uwotm8...
Trent0 The Toxic Rocket Legacy Donating Member 574 Member For: 16y 4m 24d Gender: Male Location: Brisbane Posted 15/08/16 10:28 AM Author Posted 15/08/16 10:28 AM Replaced the front lower ball joints and re greased all the bushes and re fitted the front and rear sway bars over the the weekend. Was in a desperate need to be done and it was such a simple job! No more squeaks from the front end and now I can get a wheel alignment done 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now