Xforce Exhaust Thread

[seventytwo]

Bolts up to the stock system

Ebay off RPM Supermart

[hanra]

Thank you!

[DBOSS]

I wouldnt waste your money on a 3.5 inch dump

CYA JEFF

[hqracer89]

Do they do this section with a bigger dump??

"Option 2: 4” Bell-Mouth style with smooth, unrestricted, wide open design, optimize exhaust gas flow from turbo outlet, minimize back pressure"

This is straight off there web site. www.xforce.com.au

Would this be a better option?

[Joey]

I bought the 3.5" dump with the seperate wastegate pipe. It depends on your goal mate. If you are after a dyno queen or drag car and you want maximum horsepower, the 4" is the way to go. If you want a streeter and you want to minimize your turbo lag, the 3.5" is a better way to go, though you wont be able to pump the same sort of top end power out of it. If you dont plan on going over about 380kw, I dont see why the 3.5" dump wouldnt be more than adequate and possibly a bit better around town.

My 2c :D

[Joey]

By the way, if you want a good price on a system, give the blokes at Automace a call. THey are a supplier, so they will give you a good price. I got the whole system for about $1100 including postage. Very reasonable.

Their number is: 02 4927 6666

Or else the website is: www.automace.com.au (site is under construction)

[arronm]

guys where can I buy an xforce exhaust online or that can deliver to Perth?

thanks

Jme

Call prestige in perth 92091559

[Phoontastic]

I bought the 3.5" dump with the seperate wastegate pipe. It depends on your goal mate. If you are after a dyno queen or drag car and you want maximum horsepower, the 4" is the way to go. If you want a streeter and you want to minimize your turbo lag, the 3.5" is a better way to go, though you wont be able to pump the same sort of top end power out of it. If you dont plan on going over about 380kw, I dont see why the 3.5" dump wouldnt be more than adequate and possibly a bit better around town.

My 2c :D

I can tell you that the Xforce 3.5" dump with separate pipe for the wastegate is good for 400rwkw.

[mic]

I brought a 3.5 inch x-force full system with twin dump pipe for 1500 from scotts rods exhausts yamanto qld. Great quality stainless.

[boosted_sa]

By the way, if you want a good price on a system, give the blokes at Automace a call. THey are a supplier, so they will give you a good price. I got the whole system for about $1100 including postage. Very reasonable.

Their number is: 02 4927 6666

Or else the website is: www.automace.com.au (site is under construction)

$1100 that's a damn good price