Peppy can tune?

[JETURBO]

Looks wild Joe, love it !

[eff xr6t]

Blocking the outside holes definetly makes them way easyer to control. See guys with the big and ugly hats with 3 100mm throttle blades and can't get it to even idle low enough. What do you think of the EMS ecu?

[Peppy_t92]

Exactly right..

This is a 1990's M80 EMS, so very basic, but a mate had it sitting in his toolbox and let us use it..
but yea it was easy to use and pretty straight forward.. I got in contact with Peter and Peter from EMS and they actually came out for the first fire up, they updated the firmware and also updated the board for us all for nothing! Top blokes and we're happy to come chat and give me a hand...

It was different tuning for injector open time values rather then just imputing injector data and using a VE table, but their new models support that type of tuning

This model only has 4 ignition and injector outputs so it is running on batch fire rather then sequential but it's doing the job fine, it has input and outputs to control fuel pumps, thermo fans, the fuel into the hat and will even support their fancy new dash if Daniel can afford it lol

I'd definitely talk to them before my next aftermarket setup

[Peppy_t92]

So ive spent the last few months doing bits and pieces to my car when I had time.. it has finally gone back in.

The engine has had a full freshen up, but we needed to completely port and modify another head as my machine shop stuffed up my original head

Except this time I'm testing a set of cams, hopefully to maximise the efficiency of the headwork, and retaining the VCT..my engine programs calculate peak power to be around 7000rpm and with a little more boost it will make the same power and torque down low.. I just hope the gtx35/82 can keep up

I'll be spending alot of time getting the tune dialled in, but with some quick changes it's already showing promise



https://vimeo.com/190532749

Ohh and a 50mm external gate welded to the stock manifold and plumbed back into the dump, to help with boost control and back pressure on the manifold

[xr6tForMe]

Looks great Joe!

Sorry to hear the last head was ruined.  It looked really good (and clearly worked well too).

Did you do the new head the same?

[gaz097]

Finally a thread to show off my Falcon idle.......................

[BAXRTUTE]

Hahahaha 

[Peppy_t92]

Fellas, I have some exciting news!!

I can now announce that I am the Australian dealer for the new HP Tuners nGauge



Welcome Everyone... This is the new HP Tuners nGauge, the only device which will tune, monitor, log and diagnose your Falcon, Mustang, Focus, F150 and Late model camira is support coming soon!!! Check out www.nGaugeAU.com for more info or message the Page, Trade and retail customers welcome!! RRP$650

https://www.facebook.com/nGaugeAU/posts/161377527670089

Www.nGaugeAU.com

Check out the Facebook page and website for more info but I'm happy to have a chat with anyone about it..

 

[camo86T]

Nice work Joe!!

 

Will be watching progress with interest.

 

 

Like the branding too lol

"It's never too soon for a Hoontune"

[MattyP]

Nice joe

 

do you sell the actual tuning software as well now?