Plaz Vs Process West

[Kosij]

My 1000hp plaz was seeing 46+ on a 25deg day pulling 4th gear (manual) on the dyno at 19 down to 17psi.

Fitted some water jets for now until I can grab a PW3

Same! My big plazmaman bar & plate is suffering. 40+ intake temps on the dyno. I want more power and the *beep* stopping me :(

[Kroozin]

Temp.solution

[mummba]

Back to back, PW Stg 2

must have sat for a long time!!I had a pw stage 2 and heat soak was a major issue.

we had to let it sit for ages between dyno runs when tuning, and when we ran it 3 times back to back lost 30kw.

but powercruise was the decider for me two different cars from first lap into second lap

Happy with my cooler choice.

must have sat for a long time!!I had a pw stage 2 and heat soak was a major issue.

we had to let it sit for ages between dyno runs when tuning, and when we ran it 3 times back to back lost 30kw.

but powercruise was the decider for me two different cars from first lap into second lap

Edited 16/02/14 08:33 AM by mummba

[f6mark]

Temp.solution

So Much Win.

[Kosij]

must have sat for a long time!!I had a pw stage 2 and heat soak was a major issue.

we had to let it sit for ages between dyno runs when tuning, and when we ran it 3 times back to back lost 30kw.

but powercruise was the decider for me two different cars from first lap into second lap

What you got now?

[rednose]

Back to back means back to back, ran 475 and then 476, less than 60 secs between runs.

[collierj]

I bought nizpro....... So happy that I did. Wouldn't choose another cooler after seeing this bad boy in action

[RSWEPN]

All the coolers mentioned above will do the job you're after. Speak to each company and see who you feel the most comfortable with and give them your business. They all have proven results, even a cheap ebay cooler would do the job.

[FPV TRANNY]

Got to love the Wog cooler..

[Rab]

When it was the only one out there everyone did