Here is a photographic guide to help you change the colour of the Ignition Illuminator on your BF MkII XR6.

Here is a link to the globes I used from eBay. You need a T4 Wedge globe.
http://www.ebay.com.au/itm/130582917218?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Starting with the stock orange light you can see here...


Under the steering column you will see 3 screws, philips head. Remove all 3 of these.


Now the bottom and top halves will separate on the column and you can completely remove the bottom half.


You will need to unplug this power lead. (you can do this first or second)


Here is the screw that will release the housing so you can proceed to the next step. Again philips head.



Now you will be required to remove the following 4 clips to open up the housing. This is a bit tricky but it will help with a flat head screw driver.






Here is the T4 Wedge Globe, using a flat head, twist and remove.


Replace with your desired colour LED

Now return to the car and plug it back in, test. Once confirmed it is working, place the housing back over the ignition, screw back it in and replace the steering column cover, screw in and ensure the top half is in the correct place.

After






Cheers guys

Top write up mate !!

yep well done

s

Thank you greatly, same for the interior light guide

Like!

Nice one, that looks pretty good mate, thanks for the write up

Great write up!

Fantastic pro quality photos and loved the write up mate! Big thanks, something I'll be doing for sure.

im guessing its pretty much the same procedure on a fg?

Will do it on the weekend and let you know. As everyone else has said, top write up.