atomicyellowute Member 92 Member For: 14y 5m 9d Posted 04/12/12 09:15 AM Posted 04/12/12 09:15 AM Keen to see this vid
R3dmist Member 68 Member For: 14y 22d Gender: Male Location: blue mountains Posted 04/12/12 02:34 PM Posted 04/12/12 02:34 PM +1Like these updates!
Trent0 The Toxic Rocket Legacy Donating Member 574 Member For: 16y 5m 10d Gender: Male Location: Brisbane Posted 04/12/12 04:46 PM Author Posted 04/12/12 04:46 PM
Stazza_Brendan Legacy Donating Member 686 Member For: 16y 11m 24d Gender: Male Location: Mackay QLD Posted 04/12/12 04:55 PM Posted 04/12/12 04:55 PM Nice, does it show 5th and 6th as well? or is it limited as its a BA setup, if you get what I mean.
Trent0 The Toxic Rocket Legacy Donating Member 574 Member For: 16y 5m 10d Gender: Male Location: Brisbane Posted 02/01/13 03:34 AM Author Posted 02/01/13 03:34 AM shows 5th but 6th also shows as 5 :/ I'm sure a value could be changed to show a 6So before christmas I fitted up the GTX35. Didn;t know I had to pre-load the actuator (doh!) so after getting it retuned wouldn't come on boost until 4250rpm,and didn't want to go much past 15psi. So today me and my old man pulled the turbo back off and re-adjusted it. The ute goes back into FPT tomorrow morning forit's treatment and hopefully get me into the 400+ club :D
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 21y 11d Gender: Male Location: Perth Posted 02/01/13 03:37 AM Posted 02/01/13 03:37 AM is now a good time to tell you, you can adjust the preload on the car?
Trent0 The Toxic Rocket Legacy Donating Member 574 Member For: 16y 5m 10d Gender: Male Location: Brisbane Posted 02/01/13 04:29 AM Author Posted 02/01/13 04:29 AM What! hahaha. Yeah I was told. I didn't get a new bracket with the GTX so we modified the existing one to fit and that's made it a bit difficult to do on car.
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 21y 11d Gender: Male Location: Perth Posted 02/01/13 04:31 AM Posted 02/01/13 04:31 AM Fair enough, its a bit hit and miss doing it on the car but it can be done.All you need to do is remove the two actuator mounting locknuts and crack the rod locknut, hook up and air supply to the actuator and pressurize it so it fully extends, the you can loose or tighten it as you need to.Would be hard to do with a .07 cover tho!
Trent0 The Toxic Rocket Legacy Donating Member 574 Member For: 16y 5m 10d Gender: Male Location: Brisbane Posted 02/01/13 11:46 AM Author Posted 02/01/13 11:46 AM (edited) well it's all back together :/Hey Ralph. The whole actuator arm and stuff is a DIY job. because I never got a new bracket to fit the .70 cover wehad to jig it around. It has enough pre-load now (I think) :D but your right, defo need petite lady hands to work on the thing now! hahaEnded up making a bit of exhaust to replace the CAT for "track days". The ute feels really good Hopefully everything goes well tomorrow!414rwkw @ 19psi :D Edited 04/07/13 08:56 AM by Dagabond 2
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 21y 11d Gender: Male Location: Perth Posted 03/01/13 02:23 AM Posted 03/01/13 02:23 AM
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now