5?rwkw Na->turbo Conversion

[CHLAXN]

No not first time RDP have tuned TBRE cams they have done a few cars with them one making over 1000hp

[Trent0]

Yeha RDP have done a fair few with Cams from Tony, I don't question their ability to tune.

I do however have a fault code P1386 "Camshaft Position timing Over Advanced (see bank 2) (seeP0021) so will be checking

to see if the timing chain has jumped teeth

[k31th]

You'd lose a lot of power on every throttle hit if the timing chain was off by a couple of teeth... but I've seen some funny things happen to cars with jumped teeth so it;s definitely worth checking.

[747pwr]

I had that fault come up when my old BF xr6t jumped a tooth, only signs were a slightly hunting idle otherwise drove fine

[Trent0]

So it looks like the problem may be sorted.

I went round to see Tony Bellert this morning for him to check the cams and timing. spot on. However. . .

We investigated that P1386 code and it pointed to the exhaust cam so we pulled out the Cam sensor for a look and the bloody thing was all but in two pieces. We replaced it and he checked a few other things which were all spot on.

Started it all up and it idles well now, no fault codes after 200km of driving and no more missing at cruise.

[CHLAXN]

Nice work mate hopefully it's all sorted for you now something so simple can cause the biggest problems. Tony is a top bloke willing to help you out on a Sunday

[Trent0]

I got the ute Back from Real Dyno this arvo. It is scary to drive now :D

560rwkw & 1400nm @ 22psi on e85

Edited 13/08/15 08:46 AM by Trent0

[Wilko16]

Congrats mate!!

That is huge

[k31th]

congrats mate! big power

So it definitely was the exhaust cam position sensor?

[BenDoCo]

Fantastic Trent

A 7 second run at 18kph / second would of sounded awesome.

Don't suppose you/someone got a video of the run?