Aeroflow XR6 Bolt-on Turbos?

[MerkPerk]

Hey everyone, long time lurker here just after some advice. I've recently done the bolt-on and tune thing with my MKii FG and starting to research into getting my orange taxi into the 380-400 rwkw mark. After going down the Garrett Gen II 3576/3582 rabbit hole, I've stumbled on some new turbo offerings from Aeroflow and their Boosted range that looks like it was released in 2019.

 

They have a bolt-on BA/BF/FG turbos which are GTX3576/3582 equivalents and known as the Aeroflow Boosted 5862 (GTX3576) and the Boosted 6662 (GTX3582) that both come with exhaust housings and a 36mm flapper.

 

I've done my best to find some/any information on them and its sparse out there. I've found a Skyline and 2JZ Soarer with a 6662 bolted to them and that's about it other than PR posts from Aeroflow on FB etc.

 

Has anyone heard of these? Anyone using one? As much as I want to spend $3k on a Gen II Garrett id prefer spend $2k on one of these and spend the extra on fuel system and supporting mods if these turbos check out.

 

Have provided some links here: Boosted 5862 & Boosted 6662.

 

[Slowxr6t]

A ball bearing garrett gt3582r with a .70 compressor housing got me 382 rwkw at 15psi and 414rwkw at 18psi with supporting mods. Hardly any more lag over stock turbo. I didnt want to push it further because I dont want to smash my zf6spd or driveshaft or engine for that matter, and it is plenty fast enough with 382rwkw on the road. You dont need a big dollar turbo for this level. 

[OZYWALKER]

Well if their fittings are anything to go by I would not touch them.

Speedflow for fittings
Garret for turbos.

[finnas]

https://www.ebay.com.au/itm/Garrett-GTX3576r/174103292833?hash=item28895d6ba1:g:S2EAAOSwa7RchynZ

 

Cant believe this guys turbo still up on here.  I bought his other one that is a GEN2 76.  Highly recommend.

[bfuteboy35]

I'm Interested. Did anyone try out these turbos?  Particularly the 6662

[finnas]

Checkout maxperformance's instagram. They use them quite often.

[MerkPerk]

Still waiting for some sort of tangible results. I tried looking for maxperformances IG but came up short. Do you know the exact spelling finnas?

[El Andrew]

Double X

https://www.instagram.com/maxxperformance_official/?hl=en

[k31th]

just one (obvious) aero-turbski in the first few hundred photos haha. not the best advocacy.

[JETURBO]

Aeroflow FB page which is an open page has results and seeing 500rwkw on 22 psi with a BF turbo and all the usual mods

 

Pretty much bang on with GTX G2 82

 

Rear housing looks like a bit average quality but only time and kms will tell 

so far not bad for cheap coin, just bought a GTX G2 today and currently horrendous costs due to the US dollar / Covid -19 

 

around 20% gain over February price point so making the Aeroflow more appealing, if anyone’s interested I can get better than RRP on the full Aeroflow range, just buzz me a PM