Trent0

changed the utes tune to a lower one - dumb townsville weather!

changed engine oil & fitted sandwich plate for oil senders. Left the wiring till tomorrow becauseCBF Also cbf pulling gearbox out so that's a tomorrow job :/

I got my dad to help knock it over. Easy enough to take out but was difficult putting the new center bearing back on. Is all good now. hope it doesn't happen again

also after some. . . .

No surge tank. Something I neglected to get. Only running a walbro GSS294 intank. And e85 will hopefully happen come june-ish :D clutch is slipping :( Tried to rip a skid and just went revs + stationary then a dirty carcinogenic smell of burning clutch. shoulda went an auto hahahaha

I'll have to get a pair of 17's so I can make use of them :D

I was talking to Jamie @ FPT about Power cruise :D If I head to melbourne mid this year I'll head to the sydney event, if not then I'll see if I can make my way down to the Brisbane one. Will your Project be doing skids at this years PC?

^^^ Your a ohmo Frank, just when I thought I could finally move on from my NA days

so do I get moved to the 400+ club now ? lol

Hopefully he brings back some 'aids' to show the rest of us they're not as fun as they look

Not sure on 18 but I'd say it'd just creep over the 400 mark. Max boost is 19psi then it tapers of to 18psi hahahaha, soo good. If I move to melbourne later this year where e85 is on pump I'll defo do the surge and e85. I have ID1000's I believe

yup 98 from BP. I should have put on a surge tank to do e85!

well it's all back together :/ Hey Ralph. The whole actuator arm and stuff is a DIY job. because I never got a new bracket to fit the .70 cover we had to jig it around. It has enough pre-load now (I think) :D but your right, defo need petite lady hands to work on the thing now! haha Ended up making a bit of exhaust to replace the CAT for "track days". The ute feels really good Hopefully everything goes well tomorrow! 414rwkw @ 19psi :D

What! hahaha. Yeah I was told. I didn't get a new bracket with the GTX so we modified the existing one to fit and that's made it a bit difficult to do on car.

shows 5th but 6th also shows as 5 :/ I'm sure a value could be changed to show a 6 So before christmas I fitted up the GTX35. Didn;t know I had to pre-load the actuator (doh!) so after getting it retuned wouldn't come on boost until 4250rpm, and didn't want to go much past 15psi. So today me and my old man pulled the turbo back off and re-adjusted it. The ute goes back into FPT tomorrow morning for it's treatment and hopefully get me into the 400+ club :D

2013 KX450F Will go well with the ute lol

It looks like an old fairlane

didn't think you could oil change these things. Very detailed. well done!

Installing this today :D But fixing this as well :(

your kidding yourself

me and a few mates are going for an unofficial cruise up to the high range area from townsville if anyone wants to jump on board

I tried some wrapping today. Turned out quite well . . . after about 3 attempts hahaha

Just bought a GTX35 from Joe. . Come at me 400+ club

Um I have no idea, Joe from cms done it up when he was fillding with the ECU. I can put up a vid if you ugys are interested. detects when I go to neutral too