Tom Tucker Donating Members 704 Member For: 6y 12d Posted 11/07/21 04:12 AM Author Share Posted 11/07/21 04:12 AM 100% Link to comment https://www.fordxr6turbo.com/forum/topic/95184-bf-mk-2-unopened-stock-turbo/page/8/#findComment-1706003 Share on other sites More sharing options...
Tom Tucker Donating Members 704 Member For: 6y 12d Posted 15/07/21 10:11 AM Author Share Posted 15/07/21 10:11 AM Any suggestions on the best place to put the haltech rotary dial? I have a single din stereo, but I don't reckon there is enough room for a backing plate underneath. Link to comment https://www.fordxr6turbo.com/forum/topic/95184-bf-mk-2-unopened-stock-turbo/page/8/#findComment-1706127 Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,752 Member For: 13y 11m 21d Posted 16/07/21 12:47 PM Share Posted 16/07/21 12:47 PM Centre of steering wheel Link to comment https://www.fordxr6turbo.com/forum/topic/95184-bf-mk-2-unopened-stock-turbo/page/8/#findComment-1706136 Share on other sites More sharing options...
Tom Tucker Donating Members 704 Member For: 6y 12d Posted 07/09/21 08:57 AM Author Share Posted 07/09/21 08:57 AM So, everything is back together. Just waiting on a few sensors to be installed, trim dial and some heat wrap on the dump. Run in tune next week hopefully! I'll get some pics when it's done, but engine bay looks great now. Painted body colour, super tidy. 1 Link to comment https://www.fordxr6turbo.com/forum/topic/95184-bf-mk-2-unopened-stock-turbo/page/8/#findComment-1707385 Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 17y 1m 11d Gender: Male Location: Adelaide Posted 07/09/21 09:29 AM Share Posted 07/09/21 09:29 AM Piks now bro ! Link to comment https://www.fordxr6turbo.com/forum/topic/95184-bf-mk-2-unopened-stock-turbo/page/8/#findComment-1707388 Share on other sites More sharing options...
Tom Tucker Donating Members 704 Member For: 6y 12d Posted 07/09/21 10:00 AM Author Share Posted 07/09/21 10:00 AM This is the best I can offer for now I'm afraid. Parts out of the 200,000km engine that's been running 400+kw for years. Pistons and rods actually look pretty good. Cams not so much. Link to comment https://www.fordxr6turbo.com/forum/topic/95184-bf-mk-2-unopened-stock-turbo/page/8/#findComment-1707389 Share on other sites More sharing options...
Tom Tucker Donating Members 704 Member For: 6y 12d Posted 20/09/21 12:12 AM Author Share Posted 20/09/21 12:12 AM Ok, run in tune done. 460rwkw on 15psi gate pressure. Sorry, no dyno sheet, it's just a run in to make sure everything is working as it should. Small issue they're working through is idle breaking down when it hits a certain temp. Sounds a lot like the problem another member was having with the cam phasers, and possibly a result of oil pressure related to clearances. We shall see Keen to see what it will make on 25psi+ 4 Link to comment https://www.fordxr6turbo.com/forum/topic/95184-bf-mk-2-unopened-stock-turbo/page/8/#findComment-1707683 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,593 Member For: 17y 3m 2d Gender: Male Location: Melbourne Posted 20/09/21 12:30 AM Share Posted 20/09/21 12:30 AM 15psi for 460rwkw... impressive numbers. Link to comment https://www.fordxr6turbo.com/forum/topic/95184-bf-mk-2-unopened-stock-turbo/page/8/#findComment-1707684 Share on other sites More sharing options...
Puffwagon Gold Donating Members 16,348 Member For: 10y 5m 13d Gender: Not Telling Posted 20/09/21 06:45 AM Share Posted 20/09/21 06:45 AM 6 hours ago, Tom Tucker said: Keen to see what it will make on 25psi+ Me three Link to comment https://www.fordxr6turbo.com/forum/topic/95184-bf-mk-2-unopened-stock-turbo/page/8/#findComment-1707691 Share on other sites More sharing options...
Tom Tucker Donating Members 704 Member For: 6y 12d Posted 08/12/21 08:29 AM Author Share Posted 08/12/21 08:29 AM Ok, here is a dyno graph from the run in. Zero timing, zero boost control. As you can see, it's very responsive. The valve train is noisy but the cams have changed the sound of the car by a fair bit. Sounds more JZish. Seems to have drastically increased fuel consumption too haha. The T-56 Magnum is super tight, it feels great, but the new twin plate is taking a bit to get used to. Time to put some kms on it... 3 Link to comment https://www.fordxr6turbo.com/forum/topic/95184-bf-mk-2-unopened-stock-turbo/page/8/#findComment-1709597 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now