Jump to content

Recommended Posts

  • Legacy Donating Member
  • Member For: 16y 2m 27d
  • Gender: Male
  • Location: Perth
Posted

Couple quick questions. FG XR6 turbo sedan.

19 x 9 +35 front

19 x 10 +35 rear.

Running bilstien shocks and SSL king springs all round. Will I have to do any guard work? What size tyres can I run without scrubbing etc?

I only ask as I was told that running 10s on the back of a sedan can cause problems with scrubbing etc.

Cheers Lads.

  • Legacy Donating Member
  • Member For: 14y 1m 12d
  • Gender: Male
  • Location: Riverina NSW
Posted

Fronts will be close on the inside but you should be ok with 19s. Rears will be close to flush, might be ok with a bit of stretch on the tyre and the ssl springs. If you had a choice, +30 front and +40 rear would be safer...

  • Legacy Donating Member
  • Member For: 16y 2m 27d
  • Gender: Male
  • Location: Perth
Posted

Yeah that's the only offsets they offer which is a real pain. But it's the same with all the wheels I've looked at.

  • Legacy Donating Member
  • Member For: 16y 2m 27d
  • Gender: Male
  • Location: Perth
Posted

They do have a 9.5 in a +30 and +45. How would they go on the rear?

  • Legacy Donating Member
  • Member For: 14y 1m 12d
  • Gender: Male
  • Location: Riverina NSW
Posted (edited)

They do have a 9.5 in a +30 and +45. How would they go on the rear?

The +30 x9.5 will only be 1.5mm difference from the +35 10inch, still flush. The +45 might be better but you will have more stance at the front. The +35 x9 front will sit about 15mm wider than std. The +45 rear will sit 11mm wider. Not much but just so you know. Wheels and offsets are a head ache...

Sent from my HTC One XL using Tapatalk 4

Edited by fr33r
  • Legacy Donating Member
  • Member For: 16y 2m 27d
  • Gender: Male
  • Location: Perth
Posted

Ok cool. So what problems have people run into fitting 10's under the back? Where will they scrub or hit? How people have gotten around it? I was told that the spot that the 10's will hit is the clip that the rear bumper attaches to the body that's inside the rear of the wheel arch. Is that the case or is there anywhere else?

  • Member
  • Member For: 14y 7m 5d
  • Gender: Male
Posted

PM mummba, he can check inner clearance for you with his 10 +25's

does look sick!! im running 19x10 +25 all round on my sedan

DSC_0290-Copy.jpg

  • Member
  • Member For: 13y 5m 19d
Posted

Mrdatsun its the lower trailing arm that can foul on the inside of the rim but mainly for 18s. With larger ones the bolts for the lower trailing arm sit inside the rim and don't foul

  • Member
  • Member For: 17y 11m 29d
Posted

Picking up a GTE and have some 20 x 9 and 35 offset

Tyres on front are 245 x 35 and rears are 275 x 30.

Car has standard suspension at the moment will these fit?

Cheers scorsto

  • Legacy Donating Member
  • Member For: 14y 1m 12d
  • Gender: Male
  • Location: Riverina NSW
Posted

Picking up a GTE and have some 20 x 9 and 35 offset

Tyres on front are 245 x 35 and rears are 275 x 30.

Car has standard suspension at the moment will these fit?

Cheers scorsto

20 x 9 and 35 offset will be touch and go on the front. Will most likely hit on the inside. Would be ok on the back. This is a link to my 20x9 +32 with the same tyre you have.

post-52886-0-41560700-1372937393_thumb.j

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...