arronm Dropping a turd Gold Donating Members 9,520 Member For: 16y 6m 2d Gender: Male Location: Perth Posted 12/09/16 10:37 AM Share Posted 12/09/16 10:37 AM (edited) Its not the oil.. Its the case hardness and rolling contact fatigue.. case not hard enough Gaze at my lovely lobes Edited 12/09/16 10:44 AM by arronm Link to comment Share on other sites More sharing options...
ROB83R Member 1,632 Member For: 7y 11m 9d Gender: Not Telling Location: Radioactive wasteland Posted 12/09/16 10:45 AM Share Posted 12/09/16 10:45 AM 7 minutes ago, arronm said: not hard enough That's what she said! 3 Link to comment Share on other sites More sharing options...
molch Donating Members 174 Member For: 17y 8m 29d Gender: Male Location: Central Coast Posted 12/09/16 01:34 PM Author Share Posted 12/09/16 01:34 PM 3 hours ago, BAXRTUTE said: Ive got a B series head u can take? Not sure if u can use it though? Ive pulled my atomic springs out though. Does anyone know of the b series cams are the same as FG? ive also heard the cams are the same between turbo and non turbo in the fg's.can anyone confirm? Link to comment Share on other sites More sharing options...
ROB83R Member 1,632 Member For: 7y 11m 9d Gender: Not Telling Location: Radioactive wasteland Posted 12/09/16 01:41 PM Share Posted 12/09/16 01:41 PM I think I can recall that na and turbo fg cams were the same. Don't quote that but. If ba fg are the same you're on a winner there with free cams. I dare say he'll want a bottle of makers but 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,316 Member For: 16y 19d Gender: Male Location: Melbourne Posted 12/09/16 02:08 PM Share Posted 12/09/16 02:08 PM cams are different... BA is different to BF which is also different to FG (no idea about FG-X). Pretty sure N/A and turbo are different, too (not as sure on that, though... ) Link to comment Share on other sites More sharing options...
BAXRTUTE Gold Donating Members 2,639 Member For: 8y 10d Posted 12/09/16 08:57 PM Share Posted 12/09/16 08:57 PM (edited) 7 hours ago, molch said: Does anyone know of the b series cams are the same as FG? ive also heard the cams are the same between turbo and non turbo in the fg's.can anyone confirm? @JETURBO @Ralph Wiggum Either of u 2 smart farkers know if this will work? Dont see how it wouldnt with all the b series head bolted to a f6 short...? Edited 12/09/16 09:00 PM by BAXRTUTE Link to comment Share on other sites More sharing options...
molch Donating Members 174 Member For: 17y 8m 29d Gender: Male Location: Central Coast Posted 12/09/16 09:10 PM Author Share Posted 12/09/16 09:10 PM I'm going to call ford shortly and try to get some part numbers and pricing. 1 Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 15y 5m 4d Gender: Male Location: Perth Posted 12/09/16 10:05 PM Share Posted 12/09/16 10:05 PM Make sure you mark & this retain the cam caps in correct place/position. Otherwise line honing will need to be done, to avoid premature wear as well.Basically just a heads up for people removing them etc, I found out after mixing & matching, but before it was ever near starting 2 Link to comment Share on other sites More sharing options...
molch Donating Members 174 Member For: 17y 8m 29d Gender: Male Location: Central Coast Posted 12/09/16 10:48 PM Author Share Posted 12/09/16 10:48 PM Ok so from ford, I gave them both mine and an LPG NA and they came u the same. THen started chatting to the guy and he was able to tell me these cams were introduced from BF2 10 /11 onwards. They are in the falcons, territory, xr's etc. Part Numbers: exhaust baf26250a - $395 intake baf26250b - $395 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 5m 4d Gender: Male Location: Probably above atmospheric pressure Posted 12/09/16 11:22 PM Share Posted 12/09/16 11:22 PM BF2 10/11? BF ended in 2008? Did you mean FG2 10/11? 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now