Jump to content
k31th

Show us your PC and/or Gaming setup

Recommended Posts

l give you a 4 yo desexed female cat with cash my way.

Link to post
Share on other sites
On 06/01/2021 at 2:47 PM, Boosturd said:

Hi guys, hate to pass on the cost I paid to a scalper but I am finally picking up the EVGA FTW3 Ultra 3080 I ordered on launch night tomorrow.

I managed to secure an Asus Tuf OC 3080 a few weeks back whilst waiting (ETA was unknown). I am now looking to offload the new EVGA card for the 1600 I paid for my current card... I am located in WA and would prefer not to post if possible

I thought it was worth offering it to someone on the forums prior to popping on marketplace - I have no doubt it will sell quickly

Alternatively if someone is more interested in the Tuf I might consider selling this. Card has only had a slight bit of use for Cyperpunk and has been undervolted to 0.875V from day one.

 

what EVGA card do you have? I am definitely interested in getting the Asus TUG OC3080

  • Like 1
Link to post
Share on other sites

The TUF OC is what I have and it's brilliant. So good I want to buy a second one.

Link to post
Share on other sites

Bit of building to do this weekend.

 

Grabbed a 5800X (was about all that was available), X570 motherboard, 1TB nvme and a couple of 16gb sticks of ram.

 

I've got the waterblock for the GPU already, but now need to order one for the CPU so will wait to plumb thus build - air-cooled for now.

 

20210115_143130.jpg

  • Like 6
Link to post
Share on other sites

Awesome stuff @Rab

Need pictures of the build

Edit: I just bought a Gigabyte Aorus X570 mobo for Mrs BCB's new build
Mini ITX but

  • Like 1
Link to post
Share on other sites
18 hours ago, Rab said:

Bit of building to do this weekend.

 

Grabbed a 5800X (was about all that was available), X570 motherboard, 1TB nvme and a couple of 16gb sticks of ram.

 

I've got the waterblock for the GPU already, but now need to order one for the CPU so will wait to plumb thus build - air-cooled for now.

 

 

Nice work. Just out of curiosity, what memory sticks did you get? Speed, CAS latency and RAM Size per stick?

 

Thank goodness for pay day. I went full retard and went AMD. I have ordered the Water block Bracket for the cpu.

Waiting on that, so I can get the rest of my system up and running.

MB

EniTQvE.jpg

 

mCgdLA0.jpg

 

GPU

 

RzGvALe.jpg

 

jYL8SbG.jpg

 

Can't do anything till Bracket for CPU water block arrives.

  • Like 3
Link to post
Share on other sites

haha who changed your name; The Expanse gold, personified

Link to post
Share on other sites
41 minutes ago, masda74 said:

I went full retard and went AMD. 

:buttrock:

 

no drama there mate :beerchug:

  • Like 1
Link to post
Share on other sites
1 hour ago, masda74 said:

Nice work. Just out of curiosity, what memory sticks did you get? Speed, CAS latency and RAM Size per stick?

HX426C16FB4K2/32 32GB (16GB 2G x 64-Bit x 2 pcs.) DDR4-2666 CL16 288-Pin DIMM Kit

 

Was just after something cheap quickly to get me in and out of the store :)

  • Like 2
Link to post
Share on other sites

ahh okay, why such a low speed of 2666Mhz? I been told that anything above 3600Mhz is pointless with the Gen 3 Ryzens.

Well I been struggling to find anything out there really. I finally managed to get this kit "Corsair Vengeance LPX 32GB (4x8GB) DDR4 3600MHz C16"

I actually got the same NVME drive as you, The Samsung 980 pro.

 

I do not have an air cooler as the CPU is not supplied with one. Which one you going with?

I went with the Master MB, cause of the 3 NVME slots.

Link to post
Share on other sites
38 minutes ago, masda74 said:

 I been told that anything above 3600Mhz is pointless with the Gen 3 Ryzens.

did a lot of research before I built my Ryzen system 15 months ago

3200Mhz was considered the "sweet spot" 

and if you look at recommendations from AMD, 3200Mhz is the number they use

 

eg:

4WO9ORA.jpg

 

38 minutes ago, masda74 said:

Gen 3 Ryzens.

@Rab has a gen 4 Ryzen  :aaggl:

 

gen 5 by numbering

4 must have been an unlucky number for them or something

Link to post
Share on other sites

what happened to the "edit" tab @k31th??

 

 

all I have is the "quote" tab

 

cant edit :aaggl:

 

wot. cant talk cos busy putting all my single posts into one? :hammerhead:

Link to post
Share on other sites

you wouldn't edit a post even if you could haha

Link to post
Share on other sites

lol

 

I'm always editing my posts cos always making mistakes

 

ok, found the "edit" tab

Link to post
Share on other sites

anyway... are you talking about on tapatalk or on the website? the ability to edit is still there.

Link to post
Share on other sites

its in the 3 dots on the right hand side of the post

 

whereas the "quote" tab is there to see in all its naked glory 

 

see, edited :hammerhead:

Link to post
Share on other sites

well, I'm glad you found it... now use it every time nobody has yet posted after you in a thread and it's within the 10min allowance you get to edit a post you've made :)  that'll save you getting upset that a merge script happens automatically :P

  • Haha 1
Link to post
Share on other sites

anyway, I assume "Edit" got relegated to the "3 dots" menu in this version of the forum software because it shouldn't be used as often as quote and multi-quote.

Link to post
Share on other sites

G-skill Trident Z Neo make some great 2 x 16gb 3600Mhz 18CL kits. If you look up a b-die finder you can find models that have easily overclockable memory. In any case you shouldnt have problem tweaking the timings to CL16

Link to post
Share on other sites
2 hours ago, masda74 said:

ahh okay, why such a low speed of 2666Mhz?

 

Cheap - have got 3600 in my current setup with a waterblock on them - will be swapping them in when I get the kit for the new CPU/MB

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.




×
×
  • Create New...