10SECN Member 516 Member For: 13y 4m 24d Gender: Male Location: west hoxton Posted 02/08/14 10:09 AM Posted 02/08/14 10:09 AM (edited) I'm not sure what the op has. My turbo is stock f6 turbo matty ( for the time being ) Edited 02/08/14 10:10 AM by 10SECN
ALLLAG Member 42 Member For: 15y 8m 9d Posted 05/08/14 02:34 AM Author Posted 05/08/14 02:34 AM I have an FG
Bonjaz Legacy Donating Member 1,841 Member For: 17y 9m 18d Gender: Male Location: CQ Posted 05/08/14 02:44 AM Posted 05/08/14 02:44 AM I had a mate run 400+kw with stock cross over years ago, on a hot QLD day going for a squirt it actually melted the hard plastic piping the goes from turbo to cross over. I wouldnt advise it...^^^^ this was directed at a B series
GUN-808 Member 251 Member For: 12y 10m 16d Gender: Male Location: Gold Coast Posted 01/07/15 07:02 AM Posted 01/07/15 07:02 AM I wanted the exact same as u mate and wanted that stock look..I ended up with the PW Street Airbox as mentioned above..I love the look of my setup and was happy to sacrifice a few KW for the look I wanted..Iv modded the PW unit to fit the stock OTR air intake.. Sik'ad a piece of silicone into the side with a hole cut into side panel..On a "normal" QLD day the intake sits at about 29deg and iv seen it as low as 19 (it usually adds around 6deg from a few tests).. which I dont think is too bad.. im positive under normal driving it lowers the intake temps..I cant comment on the pressure etc but I think its a good mod to do if your stuck on the crossover.. ******** Update *******Made 456KW with the crossover setup I mentioned here earlier so 450kw can be done easilly.. ran out of fuel pump so kept it at above figure for now..Was only on 18psi too and yes with E85.. MTA750 Turbo.. 2
sixman Legacy Donating Member 604 Member For: 22y 2m 4d Gender: Male Location: Hills District, NSW Posted 01/07/15 09:58 AM Posted 01/07/15 09:58 AM Nice result, got to be happy with that. No doubt power can be made with crossover, a turbo side just does it easier. I went from 400 to 450rwkw ditching the crossover. Feels like it spools quicker as well. The flip side is it makes heads turn whenever you step on it - not good when your after a stealth look
GUN-808 Member 251 Member For: 12y 10m 16d Gender: Male Location: Gold Coast Posted 01/07/15 11:12 AM Posted 01/07/15 11:12 AM If I spool any quicker ill be making 10psi at idle LOL :D
bjc Legacy Donating Member 2,823 Member For: 23y 22d Gender: Male Location: Townsville Posted 02/07/15 04:32 AM Posted 02/07/15 04:32 AM Nice mine fellas! Almost a year old...
GUN-808 Member 251 Member For: 12y 10m 16d Gender: Male Location: Gold Coast Posted 02/07/15 04:42 AM Posted 02/07/15 04:42 AM Nice mine fellas! Almost a year old... I just put it up there for reference , just in case someone actually uses the search function before asking a question in a new thread :D lol 1
rednose RNS10S Legacy Donating Member 2,229 Member For: 20y 1m 10d Gender: Male Posted 02/07/15 01:22 PM Posted 02/07/15 01:22 PM (edited) Mate of mine made 460 with a GTX3582R using herrod intake which has a very stock look, this is another option for the OP.Car ran 10.4 @ 138.http://i1145.photobucket.com/albums/o507/sk8xr8/g6eintake.jpg Edited 02/07/15 01:25 PM by rednose 1
GUN-808 Member 251 Member For: 12y 10m 16d Gender: Male Location: Gold Coast Posted 02/07/15 03:12 PM Posted 02/07/15 03:12 PM Mate of mine made 460 with a GTX3582R using herrod intake which has a very stock look, this is another option for the OP.Car ran 10.4 @ 138.http://i1145.photobucket.com/albums/o507/sk8xr8/g6eintake.jpgRednose im hoping to be very close to those times next month.. 10.5 @ 135 has always been my goal with this car for what it is..Wish me luck... 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now