Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 17y 3m 29d Gender: Male Location: Sydney Posted 11/02/14 11:57 PM Share Posted 11/02/14 11:57 PM Is that 20 degree's from the Plaz bottom to top of run????Wow.... well better start stocking up on your PW3 coolers Kev as they are gunna run out the door like hot cakes now.30+ rwkws and 10 degrees min temp drop..... So much win! 2 Link to comment https://www.fordxr6turbo.com/forum/topic/87411-plaz-vs-process-west/page/3/#findComment-1454738 Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 6m 15d Gender: Male Location: Probably above atmospheric pressure Posted 12/02/14 12:02 AM Share Posted 12/02/14 12:02 AM Keen to see details, which run was first, time between runs etc. Big temp difference!Then again for FG! 2 Link to comment https://www.fordxr6turbo.com/forum/topic/87411-plaz-vs-process-west/page/3/#findComment-1454739 Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 13y 6m 9d Gender: Male Location: WA, Perth Posted 12/02/14 12:27 AM Share Posted 12/02/14 12:27 AM Welcome to the forum Tuner involved is doing a full write up in the next day or two. Pic below shows comparison of intercooler outlet temps.498 to 533rwkw...bolt off bolt on.... Results are nothing new to me :-)This has been an ongoing debate for at least a couple of years and to be honest with you, it was starting to get really old, really quick.I was sick and tired of reading about it on a couple of forums and no one could provide any data about it.But now that there is data about it, that is just AWESOME news. I am dying to hear who actually took on the task to get this done and prove everyone wrong!! (excepting you, you were right Kev )I am now happy and proud to say I have a PW stage 2 black IC in mine. Sorry to Hijack the thread OP, but in the last couple of weeks I have been searching high and low on a few forums and can not find the answer I want.I know there is no exact figures, but could someone please indicate more or less what each IC is rated to.EG:PW/Niz/PLaz stage 1 is rated to about this much Killer wasps.PW/Niz/PLaz stage 2 is rated to about this much Killer wasps.PW/Niz/PLaz stage 3 is rated to about this much Killer wasps. Link to comment https://www.fordxr6turbo.com/forum/topic/87411-plaz-vs-process-west/page/3/#findComment-1454742 Share on other sites More sharing options...
joe@cms Member 129 Member For: 15y 11m 24d Gender: Male Posted 12/02/14 12:30 AM Share Posted 12/02/14 12:30 AM when we changed to the PW we could'bt belive the readings so I suggested to Matt not to advertise them as they were un heard of & ppl just wouldn't belive them but if he wants to post them now & see what we got then I'll leave that up to him.. 3 Link to comment https://www.fordxr6turbo.com/forum/topic/87411-plaz-vs-process-west/page/3/#findComment-1454743 Share on other sites More sharing options...
Stigmata Donating Members 235 Member For: 12y 4m 26d Gender: Male Posted 12/02/14 12:33 AM Share Posted 12/02/14 12:33 AM Wow Kev, so was that a Plaz tube n fin you back to back with? Or were they both bar n plate? Link to comment https://www.fordxr6turbo.com/forum/topic/87411-plaz-vs-process-west/page/3/#findComment-1454744 Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 18y 2m 11d Gender: Male Location: Canning Vale, W.A Posted 12/02/14 12:42 AM Share Posted 12/02/14 12:42 AM Wish I could afford a decent cool now, mines letting me down. :( 2 Link to comment https://www.fordxr6turbo.com/forum/topic/87411-plaz-vs-process-west/page/3/#findComment-1454748 Share on other sites More sharing options...
Stigmata Donating Members 235 Member For: 12y 4m 26d Gender: Male Posted 12/02/14 01:21 AM Share Posted 12/02/14 01:21 AM Most importantly, were the 2 cores the same size? As this would have a big impact on results? Link to comment https://www.fordxr6turbo.com/forum/topic/87411-plaz-vs-process-west/page/3/#findComment-1454759 Share on other sites More sharing options...
sixman Donating Members 601 Member For: 20y 10m 17d Gender: Male Location: Hills District, NSW Posted 12/02/14 01:40 AM Share Posted 12/02/14 01:40 AM Wish I could afford a decent cool now, mines letting me down. :(Your numbers with the new turbo suggest your intercooler is going allright Link to comment https://www.fordxr6turbo.com/forum/topic/87411-plaz-vs-process-west/page/3/#findComment-1454764 Share on other sites More sharing options...
TomT Spooling Member Donating Members 961 Member For: 13y 6m 2d Gender: Male Location: Blue Mountains, NSW Posted 12/02/14 03:08 AM Share Posted 12/02/14 03:08 AM I went from 428rwkw at 18psi with ~20c temp rise on plaz 800 to 457rwkw at 16.5psi with ~3c rise. Both on E70. Love your work Kev 3 Link to comment https://www.fordxr6turbo.com/forum/topic/87411-plaz-vs-process-west/page/3/#findComment-1454782 Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 18y 2m 11d Gender: Male Location: Canning Vale, W.A Posted 12/02/14 03:11 AM Share Posted 12/02/14 03:11 AM Right at its limit 3 runs backed up 470 with plenty of timing left so the rapidcooler is a cheap alternative.. but I wouldn't reccomended ordering 1 lol.<br /><br />The PW cooler was making 487 in another car and wanted to keep making power, Kev knows his stuff that's for sure. 2 Link to comment https://www.fordxr6turbo.com/forum/topic/87411-plaz-vs-process-west/page/3/#findComment-1454783 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now