fpv09 Member 25 Member For: 12y 8m 11d Gender: Male Location: MUDGEE Posted 15/01/14 01:23 PM Author Posted 15/01/14 01:23 PM I have everthing I orderd picked up at 4.30 today everthing.alex is the men to deal with.good to his word.very happy and look after me with the price very well. just need to find the time to put it all in 2
discostig Manual mode ________________________ All day, erryday Legacy Donating Member 13,798 Member For: 18y 9m 29d Gender: Male Location: Probably above atmospheric pressure Posted 16/01/14 10:26 AM Posted 16/01/14 10:26 AM Good luck smashing the ID1000s in and not tuning it! Full on. 1
willo88 Member 700 Member For: 14y 7m 29d Gender: Male Location: Newcastle Posted 16/01/14 10:52 AM Posted 16/01/14 10:52 AM I've ordered all my sh*t from plazmaman and have never had to wait longer than 2 days for anything 1
jimmy921984 Member 28 Member For: 18y 6m 30d Gender: Male Location: sydney Posted 16/01/14 11:43 AM Posted 16/01/14 11:43 AM SteveR, fpv09 is a mate of mine all he's done so far is put the exhaust on without a tune and run it up on his dyno to check where its at esp afr's more than likely we will put the the intercooler kit on with stock injectors and re roll it for sh*ts and giggles to see were its at then through the id's in and then tune it of course Sent from my RM-821_apac_australia_new_zealand_218 using Tapatalk 2
fpv09 Member 25 Member For: 12y 8m 11d Gender: Male Location: MUDGEE Posted 14/02/14 12:45 PM Author Posted 14/02/14 12:45 PM intercooler is fitted just got to do the power cables then on the dyno we go.will post dyno sheets with the bolt on's with out any tuning.I will dive it around as I build a full forge engine with a set of small cams.head job.gtx wheel with .7 cover and a ported gate fuel system up grade 1000 injector and railthen we will tune it 1
matsfgxr6turbo Member 388 Member For: 16y 7m 17d Posted 14/02/14 03:29 PM Posted 14/02/14 03:29 PM Why can't anyone wait 5 minutes for their stuff nowdays maybe order it a bit in advance of when you need it? Too much instant gratification is bad and pw is wicked
fpv09 Member 25 Member For: 12y 8m 11d Gender: Male Location: MUDGEE Posted 15/02/14 09:42 AM Author Posted 15/02/14 09:42 AM can any one tell me how to post pics on this site.
fpv09 Member 25 Member For: 12y 8m 11d Gender: Male Location: MUDGEE Posted 15/02/14 09:45 AM Author Posted 15/02/14 09:45 AM plazmen 1000hp intercooler in and finished.run on the dyno but the ecu is pulling it upbut made 379rwkwonly ext and intercooler.I don't think the ecu is happy with 11.5 afrs 2
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 19y 5m 26d Gender: Male Location: Canning Vale, W.A Posted 15/02/14 01:40 PM Posted 15/02/14 01:40 PM Go to imgur.com and upload them using the available options, itll be right infront of you. Once its uploaded use the bbcode/forum code (it will have IMG tags infront of it and at the end.) 1
fpv09 Member 25 Member For: 12y 8m 11d Gender: Male Location: MUDGEE Posted 18/02/14 11:11 AM Author Posted 18/02/14 11:11 AM I have an over boost problem.can any 1 help me out.I have hp tuner change the fuel map but keeps over boosting.dtc is saying over boost.when read data logger it says it spikes to 150 180 kpa in the ecu its only 110kpa maxcan any help me out
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now