I have everthing I orderd picked up at 4.30 today everthing.alex is the men to deal with.good to his word.

very happy and look after me with the price very well.

just need to find the time to put it all in

Good luck smashing the ID1000s in and not tuning it! Full on.

I've ordered all my sh*t from plazmaman and have never had to wait longer than 2 days for anything

SteveR, fpv09 is a mate of mine all he's done so far is put the exhaust on without a tune and run it up on his dyno to check where its at esp afr's

more than likely we will put the the intercooler kit on with stock injectors and re roll it for sh*ts and giggles to see were its at then through the id's in and then tune it of course

Sent from my RM-821_apac_australia_new_zealand_218 using Tapatalk

intercooler is fitted just got to do the power cables then on the dyno we go.

will post dyno sheets with the bolt on's with out any tuning.

I will dive it around as I build a full forge engine with a set of small cams.

head job.gtx wheel with .7 cover and a ported gate fuel system up grade 1000 injector and rail

then we will tune it

Why can't anyone wait 5 minutes for their stuff nowdays maybe order it a bit in advance of when you need it? Too much instant gratification is bad and pw is wicked

can any one tell me how to post pics on this site.

plazmen 1000hp intercooler in and finished.

run on the dyno but the ecu is pulling it up

but made 379rwkw

only ext and intercooler.

I don't think the ecu is happy with 11.5 afrs

Go to imgur.com and upload them using the available options, itll be right infront of you. Once its uploaded use the bbcode/forum code (it will have IMG tags infront of it and at the end.)

I have an over boost problem.can any 1 help me out.

I have hp tuner change the fuel map but keeps over boosting.

dtc is saying over boost.

when read data logger it says it spikes to 150 180 kpa in the ecu its only 110kpa max

can any help me out