Ozkart13 Member 32 Member For: 13y 6m 24d Posted 30/05/16 12:27 PM Posted 30/05/16 12:27 PM On 8/01/2014 at 5:03 PM, Ross23 said: HI Guys, I'm looking at upgrading my front and rear rotors with the following: Front Brake Rotors - DBA 504S Street Series T2 Slotted Brake Rotor Rear Brake Rotors - DBA 505S Street Series T2 Slotted Brake Rotor I have a 2009 G6e Turbo and was wondering if these will be worth the upgrade over the stock rotors? I'm not taking my car down the drags or anything like that. I'm just looking for a basic upgrade over the stock rotors. Thanks. Post revival! Mate did you end up doing the upgrade? I have an 09 G6E Turbo also and was keen to know if the rotors you listed here fit? I have had members tell me the fronts are 322mm not 298mm but keen to make sure before I order (5000km from the car so cant measure) Cheers.
k31th less WHY; more WOT Site Developer 30,098 Member For: 18y 5m 6d Gender: Male Location: Melbourne Posted 31/05/16 01:00 AM Posted 31/05/16 01:00 AM As per the other post about this topic, the 322mm are the ones you want for a "Turbo" model of G6E. 99% sure. Or just wait until you're not 5000km from the car or get a family member/ or friend to measure the rotors on your behalf
barnz Member 3,047 Member For: 12y 9m 27d Gender: Male Location: Brisbane Posted 31/05/16 06:15 AM Posted 31/05/16 06:15 AM 322s on the front of a g6et 110% DBA4055S for T3 fronts bf-fgx xr6t inc g6et
barnz Member 3,047 Member For: 12y 9m 27d Gender: Male Location: Brisbane Posted 31/05/16 06:27 AM Posted 31/05/16 06:27 AM ^^ 42107S for 322mm sorry.
Ozkart13 Member 32 Member For: 13y 6m 24d Posted 31/05/16 07:19 AM Posted 31/05/16 07:19 AM Alright I'm convinced! Thanks guys. The plan is DBA42107S on the front with Project Mu NS400 pads Rear will have DBA505S with Brembo pads. Looking forward to getting rid of the shudder!!
Krazy Kyle Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds Legacy Donating Member 2,697 Member For: 15y 10m 26d Gender: Male Location: Work Posted 31/05/16 10:56 AM Posted 31/05/16 10:56 AM 9 hours ago, k31th said: Or just wait until you're not 5000km from the car or get a family member/ or friend to measure the rotors on your behalf not talking to me but..... Apparently I cant drive to my house. I use to use Steve to do my car measurements when I was away....
k31th less WHY; more WOT Site Developer 30,098 Member For: 18y 5m 6d Gender: Male Location: Melbourne Posted 31/05/16 11:22 AM Posted 31/05/16 11:22 AM Fair effort...
Slowxr6t Member 593 Member For: 7y 9m 12d Location: New zealand Posted 04/05/21 07:56 AM Posted 04/05/21 07:56 AM Hi guys, iv ordered a front set of 6 pot brembos and dba t3 4000 rotors for my fgx xr6t, once installed with new fluid do I need to go and bed them in? Like 3-4 medium brakes from 60kph but not completely stopping then go do 8 to 10 harder brakes from 100kph without completely stopping then drive for 10 minutes to let cool down. Is this necessary to get the brakes sorted from the get go? Cheers guys
k31th less WHY; more WOT Site Developer 30,098 Member For: 18y 5m 6d Gender: Male Location: Melbourne Posted 04/05/21 08:08 AM Posted 04/05/21 08:08 AM I always do a bit of bedding in, but just follow the recommendations of the pad/disc manufacturer.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now