G6Et First Tune

[Stigmata]

Hey everyone

My apologies for not posting in a while, had some bad ass health probs suddenly happen. Anyway to cut a long story short had a minor stroke and docs found a hole in my heart as the cause, awesome. Only turned 40 in Jan. Oh well

So the G6 is off the road finally and work is starting on her again. I have the GTX76 in my possession and have started pulling her to bits. Just waiting on a cooler core to rock in from overseas so I can build a bigger unit and redo the piping in 3". Will have a PWR unit and polished 2.5" piping up for sale if any peeps are interested. Hasn't been on there long. Also trying to track down some stainless 4" mufflers and not having much luck, might also build my own mufflers.

Will post pics up as I go, hope everyone is well

Kind regards Jon

[JETURBO]

Jon mate no good to hear about the old ticker, but hope your on the mend

Send me a pm when and if u want the pwr unit gone

[BenDoCo]

^^^whs - except for wanting the cooler bit.

[Pixy Angel]

As long as you doing well now jon no one gives a about the build, it can wait.

A 100% Jon is what the family needs Take care mate

[Racerx]

Look after yourself Jon

[Slymeat]

Twin 2 3/4 pipes will flow more then a single 4" and have less drone, also easier to find mufflers. I am tempted to drop my 4" for twin 2 3/4's after doing some research.

[ratter]

don't think I've seen a twin 2.75" system

[Stigmata]

Yeah if I was going twin I would do twin 3. But im a sucka for single systems. Even on my ls1's I used to run single systems. Kinda funny, made some big power through single 3.5 but with external gate n screamer.

Kind regards Jon

[ratter]

if using external with screamer and wastegate is actually open under boost then exhaust size is not quite as critical, just harder to get an accurate tune

[Slymeat]

A twin system would be much easier to silence at lower speeds, I said twin 2.75 because after doing some research I noticed it would flow a little more than a 4 inch system while remaining alot quieter and twin 2.5 would flow less than a 4 inch system. Dont know if anyone makes it but it seems a sensible size.