What Injectors Should I Get?

[Flying kiwi]

Im in the process of modifying my 07 BF2, so far I have done;

Xforce 4" dump and 3.5" single system

Turbo smart 14psi actuator

Hdi intercooler kit

under battery intake/pod filter

Walbro fuel pump upgrade

Now I know I will need different injectors but dont know which ones??

40lb-60lb or more?

Im aiming for at least 300 to 350 RwKw on the dyno..

Any advice would be awesome

[Paulie2256]

60 or 80 will be fine for that power.

If you plan on using e85 may I recommend ID1000 or any of the KPM range.

If you need more info try the search function. Lots of stuff on here.

Edited 29/10/12 05:12 AM by Paulie2256

[Kroozin]

ID1000's FTW.. fine for that power level but still have some up your sleave for when you decide to mod abit further, which you most likely will haha

[JETURBO]

round ones

[TheOne]

U can try the Bosch 725 or 1000 same as ID's with out the price hike and no shiny bits.

[knoles]

If I had my to purchase injectors again right now I would go for the KPM 1000cc units. Great for that power level and room for more down the track. They did have a special going a while back with the X3 which made them even better value

[KeddyXR6T]

2nd that

[Bellato]

KPM 1000cc! At $650 a set you can't go wrong, definitely what I'm going for when I do my mods

[J Ravs]

ID 1000 all the way but also hear the kpm 1000 also good but I would be talking to your tuner

[BigAl's04]

Go the 1000cc. I made the mistake of going 60lb Deckas and now have to upgrade again as you always want more power.