5?rwkw Na->turbo Conversion

[Trent0]

After reading about a few guys on here modifying their gear sticks for a more direct feel, I decided to give it a go as well. 11/10 recommend. A bit noisier but the feel and throw is incredible. The old man made the fittings up for me.
It was also about time to replace the centre bearing as it was pretty well buggered and causing a vibration through the drive line.

[URL=https://imageshack.com/I/hlgjHjcvj][IMG]http://imagizer.imageshack.us/v2/1280x1024q90/633/gjHjcv.jpg[/IMG][/URL]
[URL=https://imageshack.com/I/pcN9ZN8Fj][IMG]http://imagizer.imageshack.us/v2/1280x1024q90/912/N9ZN8F.jpg[/IMG][/URL]
[URL=https://imageshack.com/I/hlL9qHyNj][IMG]http://imagizer.imageshack.us/v2/1280x1024q90/633/L9qHyN.jpg[/IMG][/URL]
[URL=https://imageshack.com/I/p51Z22Huj][IMG]http://imagizer.imageshack.us/v2/1280x1024q90/905/1Z22Hu.jpg[/IMG][/URL]

Edited 28/01/16 02:12 AM by Trent0

[arronm]

Images dont work

[discostig]

Well this was a bit awkward to do.  "Insert other media" in bottom left, then after it appears I had to click back in and press enter to go to a new line before doing it again.  I wish the IMG code shortcut still worked...maybe there's a new one.

Seems it's been changed somehow... see if I can figure this out

wait I think it's normal HTML  with the less than/greater than symbols around img src= etc

 

 

wait no just paste the direct link and it just makes it into the image after a second... I think.

 

 

 

 

 

 

 

Edited 28/01/16 04:26 AM by -Stever-

[Trent0]

thanks steve! I tried changing the links a few times with the edit function but the page kept timing out :/

[Trent0]

Over the last few weeks I've finally gotten around to getting everything I needed to swap covers to the fg style. Really happy with it  It looks a lot more refined.

Don't mind the bolts on top, fyi, bseries coil cover bolts don't fit

[Trent0]

I had a bit of a spirited drive up Mt Glorious the other day, upon reaching the top I pop the bonnet and idle the car for a few minutes to let it cool down. This is what I saw.

 

[Ralph Wiggum]

It's almost like the heat cannot get out...?

[JETURBO]

Precision highly do not recommend using turbo beanies!!!

[Trent0]

Someone should tell Golbeys Parts as it came with it LOL. Also is falling a part.

can you elaborate more Jetus?

 

[JETURBO]

For 1 the use of a turbo beanie voids warranty with precision 

for 2 the reason stems from what you're seeing and further complicates things regarding blocking the oil gallery with baked oil residue