E85

[JVK]

What size Jet ?

[CCCC]

If your injectors are seeing that pressure, that ain't cool. Most are only rated to 7 bar.

I think he must be seeing that preasure else were. Edited 08/01/13 09:33 PM by CCCC

[CCCC]

With the twin pumps its about 110psi at idle :/

Hey kosij, how you going mate, were you measuring that preasure from?

[ratter]

Some good technical knowledge being posted at the momment and starting to show that some fuel systems are not performing correctly

[Kosij]

With the twin pumps its about 110psi at idle :/Hey kosij, how you going mate, were you measuring that preasure from?

As said above I bunged a sensor in the fuel line that feeds the rail! So just before the rail is where I get my pressure reading from!

I only really use it as insurance to ensure both 044's are working. But it does display high numbers

Edited 08/01/13 09:52 PM by Kosij

[JETURBO]

Piks bloke lets have a see what your seeing

[f6mark]

when I do united e85. ill be only be ues'n one 044 pump & 1000cc injectors. only look'n 400rwks. will I need to run to 044 pump's to get 400rwks.?

[ratter]

looking at Tony's results yesterday, if the fuel pressure reading is correct, then 1 pump is not keeping up, but plenty will argue

[JETURBO]

In tonys case would u be expecting to see 78psi at the rail across the run as a bare minimum mick ?

[ratter]

yes give or take a few psi based on gauge accuracy and just the way the regs work, but the fuel pressure should be following the boost curve