j.d Member 1,222 Member For: 16y 1m 22d Gender: Male Location: Eastern Suburbs, Melbourne Posted 27/12/10 05:21 AM Posted 27/12/10 05:21 AM I like it!! looks good!!
01txr Member 861 Member For: 19y 8m 4d Gender: Male Location: QLD Posted 27/12/10 10:40 PM Posted 27/12/10 10:40 PM HI PSI They look orsmSo how much where they and did you get a rear one. Anyone want to buy a pair of near new genuine BF F6 grills so I can get these.
Stink Senior Moron Legacy Donating Member 1,059 Member For: 17y 4m 26d Gender: Male Location: Sunshine Coast..... somewhere Posted 27/12/10 10:58 PM Posted 27/12/10 10:58 PM Noice
shaunbags Member 92 Member For: 17y 11m 10d Gender: Male Location: perth WA Posted 28/12/10 02:04 AM Posted 28/12/10 02:04 AM Is everyone a big fan of the honeycomb design if it could be done for a factory finish I can't see it would be that hard to make some up, I'll fire up the cad program when I fly home and have a look:)And mainly the top one? I like my intercooler hanging out personally....
shaunbags Member 92 Member For: 17y 11m 10d Gender: Male Location: perth WA Posted 28/12/10 02:09 AM Posted 28/12/10 02:09 AM The only problem I've had when playing around with grille mesh bits was the airbag bar behind the badge, ended up just painting it matt black and it was ok
HI PSI Member 1,589 Member For: 20y 3m 24d Gender: Male Location: Central Queensland Posted 28/12/10 04:36 AM Author Posted 28/12/10 04:36 AM (edited) HI PSI They look orsmSo how much where they and did you get a rear one. Anyone want to buy a pair of near new genuine BF F6 grills so I can get these.I had previously purchased the Typhoon mesh with the FPV logo in it from ebay and I managed to get the details from the manufacturer from him... Hence the Fpv logo in it...The top grille and the GT bottom mesh cost me around $300 delivered. I had the F6 emblem removed form the upper mesh as I do not own a Fpv. I did not get the rear as I alrady had genuine typhoon mesh here. Although, I may consider getting it later on...I managed to fit the bar today and the Rapid cold side piping gave nothing but grief. No matter what I did I could not get the piping to sit far enough back to allow the fog lights to be fitted. I also had to remove the tray also...I ended up beaking two of the plastic clipss on my new bezels as a result..... GRRRRRR !!! NOT Happy !!!!!Anway I have attached a new pic of the bar fitted.. I am looking for plastic top grille section if anyone has one for sale....I will forward you his details if you like..... Edited 28/12/10 04:38 AM by HI PSI
Toxic Beast Member 514 Member For: 20y 24d Gender: Male Posted 28/12/10 05:50 AM Posted 28/12/10 05:50 AM (edited) nice work man !I will be doing similar job for the top grille sometime next year Edited 28/12/10 07:36 AM by ZAP PLEASE DO NOT QUOTE THE POST ABOVE
Guest markytheman Guests Posted 28/12/10 07:05 AM Posted 28/12/10 07:05 AM that's giving me a horn mate.lol
hawlass Legacy Donating Member 1,161 Member For: 18y 10m 9d Gender: Male Location: left right out Posted 28/12/10 07:14 AM Posted 28/12/10 07:14 AM "I managed to fit the bar today and the Rapid cold side piping gave nothing but grief. No matter what I did I could not get the piping to sit far enough back to allow the fog lights to be fitted. I also had to remove the tray also...I ended up beaking two of the plastic clipss on my new bezels as a result..... GRRRRRR !!! NOT Happy !!!!!"Had a similar prob myself. The silicone joiners on mine were too long on the each end of the 45's, which meant it sat to far down.The solution was to trim about 30mm off each end of the silicone 45's where they meet the alloy pipe bend. This allowed the pipe to be higher and FURTHER BACK without causing any distortion of the joiner under the headlight.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now