XR68UZ XR68UZ Legacy Donating Member 732 Member For: 20y 8m 9d Location: Sydney Posted 15/03/10 07:46 AM Author Posted 15/03/10 07:46 AM I believe they are just like that. its not a white white paint on the buttons. if it really bothers you I can swap you one just mail it back to me and ill send you out another
MiKa Legacy Donating Member 4,243 Member For: 20y 28d Gender: Male Location: Melbourne, VIC Posted 15/03/10 11:35 AM Posted 15/03/10 11:35 AM Mine had a bit of white paint on it too? But it wiped off pretty easily..
AcidTurbo6 Legacy Donating Member 34 Member For: 16y 11m 25d Gender: Male Location: Kambah, ACT Posted 16/03/10 12:10 AM Posted 16/03/10 12:10 AM havent recieved as of yet but will keep you posted
FastR1Red Member 360 Member For: 21y 4m 16d Gender: Male Location: Mt Waverley Posted 16/03/10 02:15 AM Posted 16/03/10 02:15 AM PM sent,,,just paid for mine today..
slamaa Member 88 Member For: 17y 3m 13d Gender: Male Posted 16/03/10 05:22 AM Posted 16/03/10 05:22 AM Havnt recieved anything yet, hopefully tommorow
Panda Eyes flame magnet Legacy Donating Member 5,674 Member For: 18y 4m 2d Gender: Male Location: adelaide hills- 'race air' central Posted 16/03/10 06:20 AM Posted 16/03/10 06:20 AM got mine cut today- will program tonight
MiKa Legacy Donating Member 4,243 Member For: 20y 28d Gender: Male Location: Melbourne, VIC Posted 16/03/10 07:29 AM Posted 16/03/10 07:29 AM Let us know how you go fordriver1...
Panda Eyes flame magnet Legacy Donating Member 5,674 Member For: 18y 4m 2d Gender: Male Location: adelaide hills- 'race air' central Posted 16/03/10 08:14 AM Posted 16/03/10 08:14 AM (edited) mine is working fine! I couldnt get into the mode for programming the transponder - [font="Comic Sans MS"](The instructions for programming the transponder (assuming you have 2 original keys and the flip key has been cut) is as follows: [b][I]• Insert one of the trained keys into the ignition lock and turn to the accessories position, turn to off and remove the key. • Within 5 seconds insert the second key and turn to the ignition on position. At this point the door locks should cycle to indicate the teach mode has been entered.[/I][/b] • To teach additional keys, insert the new key and turn to the ignition position, if successful the door lock cycling will indicate the number of keys taught. • Once acknowledgment has occurred turn the key to off and insert the next key to be taught. • Up to additional 6 keys may be taught in this way. • To exit teach mode leave the ignition on for longer than 10 seconds.)[/font] the car just would not go into program mode. in the end I just tried the new key- and it worked I cant work it out, but seeing it works I dont care. keep us posted on how you go with this step. Edited 16/03/10 08:15 AM by fordriver1
XR68UZ XR68UZ Legacy Donating Member 732 Member For: 20y 8m 9d Location: Sydney Posted 16/03/10 08:31 AM Author Posted 16/03/10 08:31 AM wow that's weird! with the second key are you inserting an original key or the flip key? the first and second key should be original keys, then after it enters programming mode you use the third key.
MiKa Legacy Donating Member 4,243 Member For: 20y 28d Gender: Male Location: Melbourne, VIC Posted 17/03/10 06:39 AM Posted 17/03/10 06:39 AM What are the chances of gettin more keys to suit the BA's? Once I get mine workin I know a few mates are gonna want one, plus my original is pretty sh*t..
Recommended Posts