Jump to content


Sign in to follow this  
XR68UZ

Group Buy: Flip Keys For BAs - Finally!!

Recommended Posts


I have registered post numbers. however I sent out 10 keys at the same time so if you want the tracking number pm me your address and ill give you the number. all keys should be delivered by wed at the latest though.

Share this post


Link to post
Share on other sites
mine came today aswell- quality seems average though- was pretty grotty and the white paint on the keypad looks already worn... :spit:

Share this post


Link to post
Share on other sites
I believe they are just like that. its not a white white paint on the buttons. if it really bothers you I can swap you one just mail it back to me and ill send you out another

Share this post


Link to post
Share on other sites
mine is working fine! :blaah:

I couldnt get into the mode for programming the transponder :spit: -



[font="Comic Sans MS"](The instructions for programming the transponder (assuming you have 2 original keys and the flip key has been cut) is as follows:
[b][I]• Insert one of the trained keys into the ignition lock and turn to the accessories position, turn to off and remove the key.
• Within 5 seconds insert the second key and turn to the ignition on position. At this point the door locks should cycle to indicate the teach mode has been entered.[/I][/b]
• To teach additional keys, insert the new key and turn to the ignition position, if successful the door lock cycling will indicate the number of keys taught.
• Once acknowledgment has occurred turn the key to off and insert the next key to be taught.
• Up to additional 6 keys may be taught in this way.
• To exit teach mode leave the ignition on for longer than 10 seconds.)[/font]




the car just would not go into program mode. in the end I just tried the new key- and it worked :blaah:

I cant work it out, but seeing it works I dont care. :blaah:

keep us posted on how you go with this step. Edited by fordriver1

Share this post


Link to post
Share on other sites
wow that's weird! with the second key are you inserting an original key or the flip key? the first and second key should be original keys, then after it enters programming mode you use the third key.

Share this post


Link to post
Share on other sites
What are the chances of gettin more keys to suit the BA's? Once I get mine workin I know a few mates are gonna want one, plus my original is pretty sh*t..

Share this post


Link to post
Share on other sites
[quote name='XR68UZ' date='16 March 2010 - 06:31 PM' timestamp='1268728279' post='991556']
wow that's weird! with the second key are you inserting an original key or the flip key? the first and second key should be original keys, then after it enters programming mode you use the third key.
[/quote]

yeah, and today I doesnt work....

I have 2 original keys, which im using to try to enter program mode.

is it first key to ignition- second key to accessories within 5 seconds?

Share this post


Link to post
Share on other sites
Received in the mail earlier this week, time 4 mins to set up the remote and relearn the key (with originals).
Just out of curiosity how much did everyone pay to get there key cut? I paid $18

Again thanks heaps very happy

Share this post


Link to post
Share on other sites
[quote name='Barnesy' date='18 March 2010 - 09:15 PM' timestamp='1268910908' post='992397']
Received in the mail earlier this week, time 4 mins to set up the remote and relearn the key (with originals).
Just out of curiosity how much did everyone pay to get there key cut? I paid $18

Again thanks heaps very happy
[/quote]

Were did you get it cut?

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Donation Box

    Please donate to support the community.
    We appreciate all donations!


FordXR6Turbo.com Powered by Invision Community

×
×
  • Create New...