Search the Community
Showing results for tags 'Upgrades'.
-
Hi guys, I'm a newbie to Performance Upgrades, so I thought I'd get some ideas from some of you experienced performance junkies. I have recently bought a BA XR6 that has already had Stage 3 cams fitted, oversized injectors, extractors, an X-Force exhaust and lowered about an inch and a half. It was performance tuned by a reputable company and dyno'd at just under 300hp. So it's no slouch. It needs some repairs done, rear struts/shocks, diff, one of the front bearings sounds like it's on its way out and some fibreglass needs some loving on front and rear bumpers. And an idling problem (surging revs and stalling on occasions) which I will hopefully have sorted over the next week. What I want to know is, aside from the obvious turbo upgrade, what else can I do to it to give it that extra VROOOM I love?? Any suggestions would be greatly appreciated 👍
-
Could use some advice just spent 5500k on upgrades new Plazmaman stage 3 cooler and pipes Walbro 416 fuel pump custom exhaust 4 inch ceramic coated dump 3.5 inch cat and mufflers and 3.5 inch single system 3 inch intake with pod filter car also has Crow valve springs 1000cc injectors factory turbo with flapper mod and 12psi actuator Atomic timing chain full kit ZF with custom tune car is a 06 BF MK1 running 14psi only made 338rwkw after last tune and made 327rwkw last tune with China intercooler Walbro 255 and sh*tty exhaust so I made 11kw for 5500k so you can probably understand my frustration was hoping for at least 370+rwkw was I expecting to much wonder if the tuner was just being really conservative any feed back would be appreciated
-
It's time to put a bit of extra muscle into the family bus/06TT, 7seat, all regularly used on the weekend sport runs. I have been reading through the forums have been inspired. I have debunged and plan injectors, flash tune. I'm after some guidance. 1: Turbo oil feed line filter kit. Which kit to use? Speedflow or Earls/ GJ drivelines? Or other? 2: Where to purchase injectors from? eBay? 3: Flash tune, how does this work? I believe it is a reprogram of the CPU, is it plug and play or does it require tuning skills? Is it something I buy and take to a workshop to install or is it something I purchase at the workshop as part of a tune? 4: A recommendation for a reputable and good workshop/tuner on the south side/bayside of BrisVegas if possible. Being a bit of an old fart, I'm a little out of the loop with the new technologies and this is also my first turbo vehicle. Any help is greatly appreciated. I have played with these blocks back in the day, slotted in Cortinas and then in a little front engine dragster. Managed to drag a respectable flat 13sec, carbureted, out of a TC and a 9.8, injected, out of the dragster with the same engine, so I knew they made some grunt. However the numbers I've been reading about in the forums has been leaving me gob smacked.
- 19 replies
-
Hey guys, ive been driving my ute for just over a year and im glad to say I LOVE HER to bits, I've kept her stock (cos I've had everyone say leave her OG), but now I have the urge to do a few mods... Thinking along the lines of exhaust, intake, injectors a tune, lowered and then some new shoes... Just wondering what places you recommend for doing these upgrades im from Melbourne in the south east, and with my UTE im pretty fussy who I give my car to...
-
Hi, I am looking to buy a S/S exhaust system for my turbo sedan auto, I have looked at the exhaust from Best Mufflers which are selling the XForce system, I have searched on the site and read information, I'm not interested in straight through pipes. The trouble is neither company will tell me which brand of mufflers and cat they are using and it's making me very suspecious on the price. They look good but I don't know if they are any good. Are there people out there with these exhaust systems? If you could help me it would be great. Thanks Michael 2.bmp
-
hey guys, I recently bought a 2006 BA MKll xr6t 6speed auto. I want to know which would be the best ways to start on increasing its performance.. Should I start off with a new exhaust system first? A chip upgrade? I have no idea where to start exactly.. Any advice is helpful. Thanks
- 10 replies
-
- modifications
- upgrades
-
(and 2 more)
Tagged with: