Muzza

It is set up independent to edit..but you still need edit. From $650 I think it was. Mine is set up far right hand side top of dash (low as) with a windscreen mount, makes it easy to remember to turn it up as when you start it goes to your lowest setting as defalt.. Eboost 2 windsceen mount also can intergrade a change light if you wish. Works well with my external waste gate Muzza.

OOoooo Mickey..........

Kept dry on the out side but been wet on inside. Not much else to do but drink in this weather. Muzza.

I believe it's more like 4.6ltrs. You can also jack it up from the passenger side to get the right amount in. Muzza.

Top stuff Chris!! I had my young fella looking over my sholder asking why I didn't go. Your T sounds hot. Muzza.

Bendix new generation = no dust good braking. Muz

Yep had fun,put in a few potests on the results(hate losing) Had a great day, great to meet up with a few more people,,brendon,brendon & brendon were all top blokes except for brendon I found him a bit odd. Thanks Phil & Mickey for the good day out. One last thing,,,am I the only one with a sore body?? Muzza.

Around 10.30am I'm hoping. got some work crap I need to get done first. May have a few ring ins but still unconfirmed. Muzza.

I Be there. Muzza.

Loos like I can post pic's now so here I go...

Nice one Josh....... But maybe your misses will do better?? you may never know. Muzza.

Thanks Guys for the kind words & words of encouragment Blonk . I've got the dyno graphs aswell as the comparision between the original Plenum & the Nizpro for those that are interested but before I post them I will apoligise in advance that were not done in Shootout Mod. Well there you go I can't open the browse tab??? Can't post, can anyone help???? Here is a list of mods I can remember Atomic Valve springs 44lb Eugene injectors Nizpro Plenum 2.5" piping Hybrid Cooler External PSR wastegate (9lb spring till after rebuild) Eboost Bosch remote fuel pump 4" Xforce dump APS system T56 upgrade to handle normal driving Mal Wood option 6 clutch (that's after I destroyed ceremic clutch in 1 week) Capa flash box tuned by Justin at BLACKTRACK Performance (RX Engineering) Big thanks to Justin & Merv for doing the tuning after hours & coming up with the goods. :spoton: The 2 boost setting that were done : 15lb which drops back to 13.8lb @350rwkw(race tune) & a every day boost map at 13lb down to 11.8lb @320rwkw The reason I beleve the boost falls off is the wastegate spring combo is the 9lb wastegate spring but this isn't a problem as max power is made not at max boost..After the planned but unfinanced rebuild the 12lb spring combo will go in.(if Justin lets me). The A/F was rich as after the Plenum went on which was odd as We expected it to lean out. A/F was left on the rich side at 12:1. All tunes were done on Boost 98. All I need now is time to drive it... (NO Mitch you can't) Muzza. O MarkVan we will have to catch up...

Thanks Sam, Just got back settled with 350rw but it wanted to make heaps more so it was pulled back a few lb to get it safe,,,sort of. I will post some sheets tommorrow,got to go watch 2nd half of footy. Muzza.

I was planning too but now my car will be getting tune tonight instead after the Plenum going on. Not sure who else is going at this point. Muzza.

We got lazy & Justin knows what he is doing. You scare me Tab you allways seem to be learking ready to pounce...we doing Bathurst this year? Muzza.

Hi Guys, Maybe I should have mentioned it earlier but RX Engineering is now know as BLACKTRACK Performace. Justin was the tuner at RX & now he is the owner. Hopfully once the dust settles from the purchase we will have him online as a site sponser. He is going to put on another dyno day in the near future if the interest is there. In regaurds to BCYNA's T the mods he has mentioned & the results he is getting are straight down the line. Justin will have mine back on the rollers tommorow so I will get a print out of BCYNA last run on the dyno & post it. Muzza.

& plenty more sh*t too come Paul..... Top job Nic... Muz.

Shame he didn't go to the trouble of dropping a LS1 I it!!! Make it real special..

That sounds great but I'm in Sydney all weekend but will be in for sure next time. Thanks for the heads up, Muzza.

Welcome turbo lover, There is a updated list a few pages up of the locals,if I can get a hour to read through the 32 pages I will add you.You just need to keep an eye on this pge from time to time & we will get a get together organised. Which part of Newcastle are you? Jewels I so want to go on the big Vic weekend & doing my best to get there. Muzza.

I just finished a 16hr shift so if I'm awake a 9 I mite come but feel quiet stuffed right now. Muzza.

Your just showing off now.....

Top Fuelers are on this weekend arn't they???? Then a run out to Penrith way Dat.? Muz

A mate got his tuned a few weeks back then the flex plate come loose on his BF F6 3 days later. don'tthink it's linked but scared him anyway. Muzza.

Dam !!!! Mate that's no good & if I remember your ute from the powercruise it didn't go too bad. Muzza.