Rapidyellowxr6tute

^^^Have seen the car but don't know anything about it^^^^^ Has got plenty of poke though!

Bonnet yes, spoiler no.

Yeh, must be unlucky. I'm running 295/30/19 rears and have no issues what so ever and had the same on my previous ute and not a problem either.

Hey Webby, wheels look good mate....was behind you at the bottle shop the other day and they sit nice from behind!

Yeh, I sort of figured that Pazzo as the Vertini's I've got on there now are a +20 on the front and no rubbing issues at all with a 245/32/19. The reason I'm concerned about the rears is that I want to run a 275 or 285/30/20 because the 295/30/19's on the rear atm are fine and I have room to move and that's with a +35 offset. Just don't want to spend the coin and have rubbing issues but if I have to run a spacer on the front I won't be getting the TSW's.

Hi Guys and Girls. I'm keen on a couple of the TSW wheels in 20" staggered for my FG ute but what I'm wondering is if the 20 x 10.5's for the rear will fit ok as they only seem to come with a 25 offset in the 10.5's or you can get them in a 20 x 9 rear with a 30 offset also. The fronts have a 40 offset so I'm hoping they will be fine also. Any advice would be appreciated as I want to order a set! Thanks very much......Worm or Henz????? lol

Yep, swap them over as Ford will look for any excuse to void your claim mate :(

Sorry for the late reply mate. I went with a mild steel but yeh, I was very dissapointed as it was a nightmare to fit and it hit the tailshaft. It was also way too loud for day to day duties and I was told from the start to stick with a 2 1/2 inch system and I should have listened! The drone was shocking but I have to admit, it sounded great at higher revs but just too loud for my liking.

G'day Lads, sort of off topic but I've got a set of Vertini Magic's for sale....rims only. 19 x 8.5 & 19 x 9.5 matte black. From memory +32 front and +35 or 38 rear. PM if interested.....listed in classifieds on here too. Cheers!

Yep, I'm with Henz mate, get a sound clip up ASAP! I first tried an Xforce 3 inch system and to be honest, it was terrible....the drone between 1500-2500rpm was enough to want earplugs and it hit the tailshaft so needless to say, it got pulled off the next morning and sent back...thanks but no thanks! I ended up going for a hurricane 2 1/2 inch system and it is great, no drone at all and a good bark when getting stuck into it and I used the standard tips so it still retains the factory look. I was a dissapointed to say the least as I had an xforce system on my previous ute and it was great.....maybe I got a Friday built exhaust on the GS!

Cheers Henz, I'm interested in your Rota's mate.....can you or is there a pic you can post for me to have a look at? What sizes are they? Thanks!