FIXR7 Member 116 Member For: 15y 14d Gender: Male Location: Perth Posted 01/08/13 04:12 AM Share Posted 01/08/13 04:12 AM OK. I just thought that because 255 fit on stock 8.5 inch wheels that they'd be too small on 10 inch wheels.Well technically they are a little on the small side but some people like that size on that width. 255 is approx 10" so in theory it shouldn't be too stretched on a 10.5" rim. Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/220/#findComment-1411922 Share on other sites More sharing options...
mummba Member 525 Member For: 15y 3m 2d Gender: Male Location: perth Posted 01/08/13 11:04 AM Share Posted 01/08/13 11:04 AM yeh went 255 as a trail fit, just to be sure they would make it under the guards, didn want to get my rims then wait for tyres to turn up,bit of flaring and 295's will go onjet; check out xyz coilovers from performance sus, good value, am thinking of going this path myself 1 Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/220/#findComment-1412082 Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 7m 19d Posted 01/08/13 11:29 AM Share Posted 01/08/13 11:29 AM sh*t it's looks so high there. Much happier with my 305s although my diff bushes aren'tWhat are the specs on these wheels mate, both front and rear? Are they invo 305's?I wish I didn't go so low so I could have more aggressive wheels Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/220/#findComment-1412100 Share on other sites More sharing options...
JordanByrneJ07 Member 62 Member For: 12y 6m 11d Gender: Male Location: Gold Coast, QLD Posted 02/08/13 02:34 AM Share Posted 02/08/13 02:34 AM jet; check out xyz coilovers from performance sus, good value, am thinking of going this path myself+1 on Performance SuspensionI am running the XYZ coil over set-up in my Ute, Defintely recommend.And Chris is a good guy to deal with Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/220/#findComment-1412242 Share on other sites More sharing options...
wanted New Member 6 Member For: 12y 2m 16d Posted 07/08/13 10:43 AM Share Posted 07/08/13 10:43 AM Guys that are running a 255/30 r20 up front what do you guys do about the load rating??? Can only find tyres with a 92y. Thought fg falcon needed 93yAnthonyHey Guys, ok, I think I have finally decided on a set of wheels. TSW interlagos for the G6ET. Plenty of performance cred but more classic styling to suit the G6ET. I am hoping that Jimmixr will provide some wisdom with regards to guard clearance as I will be getting the same offsets 20x8.5, ET+20 with 255/30 Invos and 20x10, ET+40 with 285/30 Invos. Will I have to roll guards at both ends? What springs are in each end? Opinions on my selection welcome too. Thanks Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/220/#findComment-1413830 Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 7m 19d Posted 11/08/13 03:11 AM Share Posted 11/08/13 03:11 AM Hey guys whats your thoughts on the following19x9.5 +30 with 245/40 19x9.5 +35 with 275/35Just not sure how the front will look with some stretch but with the rear having none? Cars pretty low and not much camber so not sure how much lower in offset I can go at the front and dont want to stick out any further than the rear Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/220/#findComment-1414800 Share on other sites More sharing options...
mummba Member 525 Member For: 15y 3m 2d Gender: Male Location: perth Posted 11/08/13 06:15 AM Share Posted 11/08/13 06:15 AM ^^ my rims sit exactly the same out from the guard front to back with the same width and offset, so if you want them the same keep distance from the guard,keep the same offsets +30 Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/220/#findComment-1414837 Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 7m 19d Posted 11/08/13 06:57 AM Share Posted 11/08/13 06:57 AM I'm not running less than +35 on the rear as I want to go minimum 275/35 and at my height any lower won't work.More or less worried about whether the stretch at the front might look stupid compared to no stretch in the rear Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/220/#findComment-1414856 Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 17y 2m 19d Gender: Male Location: Vic Posted 11/08/13 10:47 AM Share Posted 11/08/13 10:47 AM 245 isn't too stretched, will that clear the inside though? Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/220/#findComment-1414946 Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 7m 19d Posted 12/08/13 06:31 AM Share Posted 12/08/13 06:31 AM Nah not that stretched but will be more stretched than the rear.Yea they'll clear inside. I ran 20x8.5+42 with 225/35 and so a 19x9.5+30 is the same. I'll probably run a lower offset than this but this is pretty safe in terms of how close to the guard it is Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/220/#findComment-1415194 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now