Fg Offsets And Tyre Questions

[j.d]

what would be the best offset to sit flush/just inside the guard on the rear of the utes? Was looking at 20x10's

different size, but I have.. +40 19x9.5 with 285/35 tyres sits about 5mm inside the guards, which works perfect for me coz half the tyre is covered by my guards

[Tocchi]

Rob at monsta torque has 20x11s on his FG ute

[JET-270]

mm now they look nice! what offset would that be?

Got to have a look around see whats available in 20x10 +40..

[Dillz]

Not XIX X23's, they're taken already lol.

Mate it looks perfect standing still but it will hit the guards a fair bit so get use to burning through tyres, and clinching everytime you go over train tracks or dips in the road. Not practical but who cares as long as it looks good right?

Sedan that is, if you got a ute then by all means go nuts.

[Tocchi]

with 10.5" wide rears I never had issues with that ^^

[wilba]

I have 20x9.5 with +30 offset and Im still goin to put 10mm spacer in fg ute

[JET-270]

it'll be on a ute so shouldn't be an issue right? Really liking the jap style wheels haven't looked into it too much yet though..doesnt look like theres much available in that size

[Corzza]

So Dillz what are the exact dimensions of your rims and the tyres? front and rear if you don't mind.

Edited 12/10/11 09:21 PM by Corzza

[Dillz]

20x8.5 (245/35/20) 20x10 (275/30/20)

I think I've either fluked the perfect offset or they're just hitting but not enough to notice any damage or anything like that, only time will tell I guess.

[JET-270]

Found some real nice wheels..Lenso D1R's looking at 20x8.5 +32 or +20 (which one?) and 20x10 for the rear with an offset of 32 is that going to fill out the guards nice and sit flush?