Jump to content

Recommended Posts

  • Member
  • Member For: 13y 4m 2d
  • Gender: Male
  • Location: Melbourne
Posted

So related to my post about my car I am in need of an xcal 3 or 4.

I have two offers I can look at and am wanting people in the know to give me the pros and cons.

Two options are unlocked and only used once (unmarried with 4 uses left each) xcal3 for $400 or xcal4 for $500.

What are the reasons for getting a 4 over a 3 apart from the digital gauges and extra spaces for tunes?

What do you think is better value? Bearing in mind that brand new from herrod an xcal4 is $670.

Or wait for a cheaper xcal3 to turn up as I have seen them sell for cheaper unlocked.

Cheers,

Nathan

Sent from my Nexus 6P using Tapatalk

  • To Loud
  • Legacy Donating Member
  • Member For: 14y 9m 27d
  • Gender: Male
  • Location: WA, Perth
Posted

I would say hunt around on gumtree. I am pretty sure that $400 for an xcal is the norm, but every so often the unicorn xcal3 for $300 does show up unmarried

  • MattyP
  • Legacy Donating Member
  • Member For: 14y 4m 22d
  • Gender: Male
  • Location: Central Coast
Posted

Both pieces of crap

May as well get the cheaper piece of crap

  • Like 1
  • Member
  • Member For: 13y 4m 2d
  • Gender: Male
  • Location: Melbourne
Posted

Lol! Mattyp is there anything else I should look into.

Always thought they were the go but I'm only getting one because that's what Nizpro is going to use to tune the car.

Yeah keeping a keen eye on gumtree at the moment. That's where these are both from.

Been asking for screenshots too and most can't provide them or just sell them locked.

I rang herrod and they said they don't unlock them anymore they just exchange them for $350 however I emailed SCT and they unlock them for $150 so I just don't want the hassle of having to send it off etc.

Sent from my Nexus 6P using Tapatalk

  • MattyP
  • Legacy Donating Member
  • Member For: 14y 4m 22d
  • Gender: Male
  • Location: Central Coast
Posted

Yeah always better to get an unlocked one

They just aren't reliable especially in the heat

I've been stuck a few times

The only option is hp tuners but I'm unsure if nizpoo doit

  • Legacy Donating Member
  • Member For: 21y 2m 18d
  • Gender: Male
  • Location: OZ
Posted

The Xcal4 scrambles the info in the VID block so other software can't pick up the strategy code. You can't use programs like Forscan to datalog with an xcal4 tune. For this reason I prefer the xcal3.

  • Like 1
  • less WHY; more WOT
  • Site Developer
  • Member For: 18y 5m 16d
  • Gender: Male
  • Location: Melbourne
Posted

holy crap... didn't think that SCT would do anything dodgy with a new hardware release again... these guys seem to like to try to shoot themselves in the foot.

  • Like 1
  • Legacy Donating Member
  • Member For: 21y 2m 18d
  • Gender: Male
  • Location: OZ
Posted

Yeah I know. If I use the xcal4 on my BA then I can't even use my xcal2 and livelink to datalog.  The scramble was implemented to stop HP Tuners from reading tunes, however HP have now configured their software to pull the Strategy info from another location and can now read xcal4 tunes!! 

  • Like 2
  • less WHY; more WOT
  • Site Developer
  • Member For: 18y 5m 16d
  • Gender: Male
  • Location: Melbourne
Posted

that's some seriously dodgy :bs:

  • MattyP
  • Legacy Donating Member
  • Member For: 14y 4m 22d
  • Gender: Male
  • Location: Central Coast
Posted

I don't even like the x3 now I hate them that much more

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...