Fg Mk2 Headlights Fitting On Mk1

[rabbzh]

Hi iv got a mk1 xr6t and im wanting to put the mk2 front end on does anyone no if headlights and bumper will bolt straight on and if any wiring is involved with headlight

Sent from my SM-G920I using Tapatalk

[boost26]

Most of it bolts straight on.

Headlight wiring for low beam is different. You will need to do some wiring changes as Mk1 uses a H4 which has a dual element globe with low and high. Mk2 only has single element globe

[rabbzh]

Ok thanks

Sent from my SM-G920I using Tapatalk

[Phillip vellios]

On 30 December 2015 at 10:55 PM, rabbzh said:

Hi iv got a mk1 xr6t and im wanting to put the mk2 front end on does anyone no if headlights and bumper will bolt straight on and if any wiring is involved with headlight

Sent from my SM-G920I using Tapatalk

Hi mate  I WHANT to do the same  eny devise 

[SgtPepperoni]

Hi there, I had a little accident and I needed 2 new FG XR6 MK1 headlights.

I wanted to upgrade this to MK2 and reading this post I should do a proper wiring for them.

 

Someone has done this job already? Any scheme of the wiring? Any suggestion? Any guide?

 

Thanks :D

[Rab]

I think the bumper is a different shape WRT the headlights?

[k31th]

the only different shape (on the outside) is the low beam globe mount at the back (unless you mean XR vs FPV, as XR has the twin curves at the bottom, FPV is flat).

 

The wiring (for only the low beam) is probably just a matter of getting or making a connector(s) for the pins of the new globe type and removing the old connector and then joining just the pos/neg of the wiring as you don't need the relay portion anymore.

[bossmang]

I dont think the bumpers are different

 

should be straight swap but there is some wiring needed or a resister or some mumbo jumbo wizz bang thingo needed. 

[SgtPepperoni]

Who can do this job?

[OZYWALKER]

Pm sent.