Jump to content

Recommended Posts

  • Too heavy needs boost
  • Member
  • Member For: 13y 1m 12d
  • Gender: Male
  • Location: Adelaide
Posted (edited)

So I finally decided to change over the factory premium sound (lol premium)

I bought kicker CS65 100wrms speakers 6.5". Nice little speaker with 43mm mount depth. 0a1b2ab7a7fa2fbb3fe44aa1759278d6.jpg

9833dfc30abef87f381b149622bee388.jpg

So the first thing was to remove the door trim thingy. Very simple.

906810e2ebd29ae42ef7c51a24adaaff.jpg

after removing that there is 5 screws. They are t 25 star head ones. Well that's what they are in my superchimp tool kit.

Also make sure not to brake the clips holding the door trim insert on.

ca9a35209f006944ec450a81bdf057ca.jpg

2968d8df2956880b7a929e74efb6366e.jpg

There are two behind the door insert two down the bottom and one under the rubber insert in the door handle

7706f6b95d082696cded5451bd745fe4.jpg

Just pop the clips and lift the door trim off.

Now before fully removing the door you have to disconnect the door handle cable and power windows and side mirror cables.

2e7fb75af4f10810dfaa9009e8d46ed5.jpg

84cdb8fce52af283474912964293ed75.jpg

Ok so now you can see frauds premium sound.

1c4cb007813f3c0ecbe6267986948e2e.jpg

Three screws and that sh*t is gone but make sure you know which is positive before smashing it.

6763f69b1dd142da5e74f998828dcd4b.jpg

So this is the first time have used a jigsaw and it didnt come up to bad. I made a stencil from the old speaker with 16mm MDF.

6a166bcb5fe0a4c7b8af8e7d7de8a614.jpg

6862ca02a2280b25f8b5cebd6c1e57b7.jpg

Not the best but did the job.

ef837bb1dc634d2c851719fceb277bc9.jpg

5d99fa369cf31ff37966bd40e7242a2e.jpg

e950287b92c184c1f4f4aa9300a9b089.jpg

So that's the fronts done. Not to bad for a lazy basted with fark all tools. So if I can do it anyone one should be able to. Doing the rears tomorrow so ill post that up tomorrow. But all I can say is its a sh*t load better and so much clearer.

Edited by Bizkets is Drunk?
  • Like 4
  • XR50T
  • Legacy Donating Member
  • Member For: 13y 4m 17d
  • Gender: Male
  • Location: Western Sydney
Posted

Onya Biz, top writeup. Gonna have to get mine sorted now.

  • Like 2
  • Member
  • Member For: 12y 9m 29d
  • Gender: Male
  • Location: Brisbane
Posted

Lolz at half a write up, beer o clock ill do the rears 2mozza.

Nice jig saw work(I actually mean that)

Pics needed moar sparkys tools and gold ring's

  • Like 1
  • Too heavy needs boost
  • Member
  • Member For: 13y 1m 12d
  • Gender: Male
  • Location: Adelaide
Posted

Ill show my dodgy sparky work tomorrow.

As for the bling. One wedding and the other pops from russia before world war 2

  • Like 2
  • Too heavy needs boost
  • Member
  • Member For: 13y 1m 12d
  • Gender: Male
  • Location: Adelaide
Posted (edited)

Didnt post this pic barnz but I will just for you. 5cf380eebc32af147a830c0af987afd5.jpg

Bling through the gorilla hair.

Edited by Bizkets is Drunk?
  • Like 1
  • Member
  • Member For: 23y 8m 26d
  • Gender: Male
Posted

You didn't change the A pillar tweeters ??

Whats the bass like compared to the 'premium' speaker ??

  • Member
  • Member For: 13y 6m 23d
  • Gender: Male
  • Location: Perth
Posted

Are they just running off the stock amp? Have you lost a bit of volume?

  • Too heavy needs boost
  • Member
  • Member For: 13y 1m 12d
  • Gender: Male
  • Location: Adelaide
Posted

They are a sh*t load better. Straight off the icc and they get loud. Ill have the rears in around lunch so ill be able to give it the full test. Only thing letting me down now the sub.

  • Like 2
  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 3m 18d
  • Gender: Male
  • Location: Adelaide
Posted

Good write up brad !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...