Hi guys,

I was discussing fitting a Precision 6466 with my mechanic and he mentioned the 'new' GTW3884R. Apparently its the Garrett equivalent to the 6466 but a fair bit cheaper, my mechanic said he can get one for about $1500.

Has anyone used this turbo or have any results on it?

Andy

There are 2 versions, make sure you ask which one.

http://www.atpturbo.com/info/garrettgtw.html

Not a direct replacement for gt or gtx either.

Apparently there's a gtw3884 that's straight bolt in? I was looking into them

Yeh I've already had a gander but at very close to 3k with rear housing it's up there

But some people like to be the ones down different paths

we can get them using a factory rear housing, but as mentioned, there is 2 of each model, cartridge or ball bearing

I believe the gtw3884 can be used with factory rear housing but the housing requires machining

They have different oil fittings to the gt/gtx also. According to their website

Negligible part of the cost though I suppose

Edited July 1, 201511 yr by barnz

This mob are selling it with exhaust housing for the xr6turbo

http://www.pacperformance.com.au/news-14932/new-release-garrett-gtw3884r-bolt-on-turbo-for-xr6t-falcon.aspx

Be interesting to see how this turbo goes, will it be laggy?

As I said near 3k with rear housing

May have some results sooner than later if it's the goods or not