Checking Zf Oil For Coolant

[julesk_1972]

What was the trans temp range during the drive?

Does the trans temp get above 85deg C if in bad traffic?

[JETURBO]

We done a stack of those installs and every single zf is still working perfectly and zero chance of a milkshake

I used this setup on my own F6 for over 50,000kms before we attached one to a customers car so well proven

[julesk_1972]

What installs?

PWR or airi to air?

[Wilko16]

Air coolers like bizkets photo above

[JETURBO]

WSS

[Ralph Wiggum]

Pwr for my money.

Have a look at the zf tune tables then tell me fluid temp control isn't important.

[JETURBO]

The oil to air located correctly, picking a calculated size and line path runs very similar to the exchanger temps

This is one reason we never went fan mount

Sussed all that out big fella

[Skids4kids]

The way the car is used should dictate the trans cooler/exchanger used.

I don't see the exchanger doing to well at a Powercruise type event.

Can someone elaborate on whats wearing in the trans when a air to air is fitted to a ZF?

Edited 12/04/15 12:45 AM by Skids4kids

[Ralph Wiggum]

Air to air is still has a temp variable depending on ambient temp.

[Skids4kids]

I did the same as Bizkets but drilled about 200 tiny holes in the plastic behind it to get better airflow.

Also used a LONG brand cooler.

ZF should have 1/2" or AN8 trans lines also not 3/8.....are yours 1/2" Bizkets?