barnz Member 3,047 Member For: 12y 9m 30d Gender: Male Location: Brisbane Posted 11/05/15 12:38 AM Posted 11/05/15 12:38 AM (edited) 5LOW6 hey(took me a couple of seconds). I like it.Should have got GO TIM! Edited 11/05/15 12:39 AM by barnz 5
genuine honest person Member 2,769 Member For: 12y 7m 22d Gender: Male Location: near brisbane Posted 11/05/15 05:47 AM Author Posted 11/05/15 05:47 AM they would have been over $2000 for them . yes I would like them lol .
genuine honest person Member 2,769 Member For: 12y 7m 22d Gender: Male Location: near brisbane Posted 12/05/15 07:48 AM Author Posted 12/05/15 07:48 AM phoned Brisbane engine balancing at Capalaba , he said to balance the engine would cost $255 and to get the engine hot tanked cleaned and the crank cleaned up and to hone the bore fit bearings and rings would only set me back about $1000 to $1300 . he has done a lot of work for a mate of mine that has toranas and old fords (351 ) never had a problem with him . the owner of the machine shop said that the falcon engine are simple as to assemble if you got the right tools .
Bomber Carnage on the Garage Floor Legacy Donating Member 3,994 Member For: 16y 4m 8d Gender: Male Location: Gold Coast Posted 12/05/15 08:02 AM Posted 12/05/15 08:02 AM So what are you doing this week. Rebuilding the FG motor now with stock slugs and rods or....? 2
genuine honest person Member 2,769 Member For: 12y 7m 22d Gender: Male Location: near brisbane Posted 12/05/15 08:35 AM Author Posted 12/05/15 08:35 AM well ,I have decided to listen to Jamie only from now on . He is the one in the know how , not me or some of the forum members . He said that standard rods and pistons are fine to use for the power I am after . Bomber the only reason I was going to get the engine build with new rods and pistons was because you asked Tony for a price which you pm me(as you commented it would be a shame NOT to fit new rods and pistons ) . the price you gave me was $3300 which I thought was a fair price and I was going to get it done .But after phoning him my self and realising that you gave me wrong information about the price (he said it would cost me $4250 ) . so please just back off with the little digs you give me as you were the person that was giving me the wrong advise . and now you try to make me look like the person that can not make up his mind , I know that I like to ask a lot of questions and come across as a idiot to most but lot of that is due to my spelling and grammar 1
Wilko16 Legacy Donating Member 1,672 Member For: 18y 9m 29d Gender: Male Location: Melbourne Posted 12/05/15 09:32 AM Posted 12/05/15 09:32 AM (edited) Finally you are listening to the right person! Good stuff mate, all we want to see now is progress pics and dyno sheets Then videos of tyres smoking!!! [emoji106] Edited 12/05/15 09:33 AM by Wilko16 4
qwert Member 68 Member For: 14y 8m Gender: Male Posted 13/05/15 11:17 AM Posted 13/05/15 11:17 AM The pressure is on now Gunna !Which Tunna will hit the road first ! he he 1
qwert Member 68 Member For: 14y 8m Gender: Male Posted 13/05/15 11:25 AM Posted 13/05/15 11:25 AM Hey Bomber, my utes with Clint at the moment !Gee he can spin a wrench ! 1
genuine honest person Member 2,769 Member For: 12y 7m 22d Gender: Male Location: near brisbane Posted 13/05/15 11:41 AM Author Posted 13/05/15 11:41 AM yours will , have to go to munchies when it is all back together .starting to take the engine out on the weekend ,so that will be the start of it . 1
Bomber Carnage on the Garage Floor Legacy Donating Member 3,994 Member For: 16y 4m 8d Gender: Male Location: Gold Coast Posted 14/05/15 06:18 AM Posted 14/05/15 06:18 AM Yep, the little man can spin a wrench & tune a car too 1
Recommended Posts