Jump to content

Recommended Posts

  • Legacy Donating Member
  • Member For: 21y 7m 14d
  • Gender: Male
  • Location: Brisbane
Posted (edited)

Did 183,000 kms in my bf f6ute with nizpro stage 2.5 kit. It fluttered its arse off. No problemos with at it all.

Edited by syco6
  • Like 1
  • Manual mode ________________________ All day, erryday
  • Legacy Donating Member
  • Member For: 18y 9m 30d
  • Gender: Male
  • Location: Probably above atmospheric pressure
Posted

Currently have a turbo that is 125,000 odd km old and has seen a 15PSI tune since it went on the car. Still working fine and I love love love to make it flutter!

The one that was on the car for the previous 100,000km got a tiny bit noisy and as replaced under warranty...car was stock and previous owner the WA Police until I bought it as 37,000km.

TUUUUTUUTUTUTU

  • Hench, but no longer shredded or tanned.
  • Member
  • Member For: 19y 5m 27d
  • Gender: Male
  • Location: Canning Vale, W.A
Posted

Turbo forums wouldn't be the same without this question coming up every few weeks

  • Like 3
  • flame magnet
  • Legacy Donating Member
  • Member For: 18y 4m 8d
  • Gender: Male
  • Location: adelaide hills- 'race air' central
Posted

so true boink...

  • Member
  • Member For: 12y 10m 4d
  • Gender: Male
  • Location: Brisbane
Posted (edited)

Turbo forums wouldn't be the same without this question coming up every few weeks

This and discussions about the best tasting tuna and mysterious rear end clunks....

Seriously though it would be a crime to put a bov on this rig as im fairly certain this is old mate doing the 240t into a maverick conversion.

I wanna hear that barra snorkel dose!

Edited by barnz
  • Member
  • Member For: 12y 9m 17d
Posted

I ran my car on 27psi, every day for years which was at the upper limit of the turbo shaft speed and never any bov. Still have the turbo sitting on the bench and all is good.

I think you'll find most of the your turbo will explode, it will backspin your turbo, it destroys your bearings, increases global warming, and the rest of the wanky dramatic theories were pushed by the aftermarket industry who conveniently sold the solution to this catastrophic problem.

Im not a real believer it reduces lag either. Some back pressure on the compressor might reduce the speed of it, but how long does it take to fill the charge pipe/intercooler after most of that air is vented - especially with some of the apartment block sized coolers the ford guys use.

  • Hench, but no longer shredded or tanned.
  • Member
  • Member For: 19y 5m 27d
  • Gender: Male
  • Location: Canning Vale, W.A
Posted

I think you'll find most of the time your turbo will explode, it will backspin your turbo, it destroys your bearings, increases global warming, and the rest of the wanky dramatic theories were pushed by the aftermarket industry who conveniently sold the solution to this catastrophic problem.

Lmfao QFT.

Sorry mods, but I cant squander the opportunity to quote such a great paragraph

  • Member
  • Member For: 15y 3m 10d
  • Gender: Male
  • Location: Brisbane QLD
Posted

I've had my car dosing for a good 80,000KM have not had an issue.

What you're worried about it True compressor surge. ( dosing while under load and boost ) But having no load on the turbo while it does it causes mostly no issue. The worst it can do it slow the turbo a little more than a BOV would, so it takes a little longer to come back onto boost.

Your turbo does not spin backwards. It does not bend the fins.

https://www.youtube.com/watch?v=nCj6Spwl1CU

  • Member
  • Member For: 12y 9m 17d
Posted

Takes a bit longer to spin up but no longer has to pressurise the charge system, pick your poison and zuu tu tu tu all the way I say.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...