If you have the right hook ups and connections you can build an all day every day 600 rwks bottom end for under 5k.

Edited January 7, 201412 yr by Vevapower

have a look at TBRE on facebook, he has built bottoms for these already assembled

The 6235 is a water cooled core which Precision weren't using previously so one would thing durability is increased over the traditional air cooled precision CHRA. The GTX wheel was designed with quietness in mind and that it is, the 6 blade Precision wheel a likely to perform ever so slightly better than a GTX35 despite the compressor and turbines being the same size.

The GTX35 is the ultimate in reliability but the Precision may perform slightly better and will have a more horny turbo noise.

more horny turbo noise.

...excellent.

Moar turbo noise is very important

Especially if it's horny!

Is the actual turbo horny? Or does it make everyone that hear it horny?

If the latter I really need to buy one for the misses

If you have the right hook ups and connections you can build an all day every day 600 rwks bottom end for under 5k.

Lookin into buying a short motor from ford which has all the near gear in it then service my head providing it's not RS.

Still gotta wk out the sump part

Still going to buy a new turbo folks sorry about the cross thread

This is like the least derailed thread I've ever seen