Jump to content

Recommended Posts

  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 3m 23d
  • Gender: Male
  • Location: Adelaide
Posted

Talks cheap dumpling lol

Should get mick to overlay and see if your manual has more pull

$5 says it should

I think mine only made 380 ish on 98 anyways

  • Legacy Donating Member
  • Member For: 18y 4m 13d
  • Gender: Male
  • Location: Loitering in SEQ
Posted

Worried about e85???

  • Member
  • Member For: 16y 2m 3d
  • Gender: Not Telling
Posted (edited)

Lovely job Henry (and Pitlane), I share you thoughts about E85 also. E85 out of a drum's consistant, but out of a pump there appears to be many variables.

Cheers

Edited by Impellor
  • Legacy Donating Member
  • Member For: 18y 4m 13d
  • Gender: Male
  • Location: Loitering in SEQ
Posted

Not at all just dont tune it to within an inch of it life. We made 400 kw on pump 4plus yrs ago but that's cause we didn't have to option of e85 back when. Would much prefer to make 400 kw on e85 than 98 especially if it's readily available.

Good work though bud, a solid result with quality parts

  • Member
  • Member For: 16y 2m 3d
  • Gender: Not Telling
Posted

From my understanding John, the E85 (pump) is that one day, and E70 the next.Which surely would create problems with mixtures (lean out) ?

By the way looks like a really sweet tune, very solid boost and AFR's .

Cheers

  • Legacy Donating Member
  • Member For: 18y 4m 13d
  • Gender: Male
  • Location: Loitering in SEQ
Posted (edited)

We've never had any inconsistency issues. exact same tune 6mths apart and afrs were bang on identical. also have run them at 40psi through a std 1jz so its good gear. it's not as temperamental as people say it is, like I said earlier dont tune it to it's limits, leave some fat in it.

Edited by qik1
  • Legacy Donating Member
  • Member For: 20y 1m 3d
  • Gender: Male
  • Location: Melbourne, VIC
Posted

Worried about e85???

I think its more because he doesnt drive it enough and the fuel would just sit there for long periods, thus may not be any good anymore?

  • Like 1
  • Legacy Donating Member
  • Member For: 18y 4m 13d
  • Gender: Male
  • Location: Loitering in SEQ
Posted

^^^ that's more than understandable, we only get away with it because of every hose being Teflon braided. Have seen a few hose issues with it sitting for a while.

Any other goals for the ute, gonna use it for something in particular Henry?

  • Member
  • Member For: 15y 1m 1d
  • Gender: Male
  • Location: Werribee,Melbourne, Australia
Posted

congrats mate looks like mick and the guys hit the nail on the head yet again good job .. and congrats

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...