cam69 Member 18 Member For: 13y 8m 2d Posted 03/02/13 04:19 AM Author Posted 03/02/13 04:19 AM Thanks Benny,Well I have the car now and have decided almost immediately that the exhaust needs improving so first stop is the exhaust shop for this ring removal. If that's not cutting the mustard then will look at the xforce setup as mentioned by xrsext and then also a tune.
egoxr6tute Legacy Donating Member 56 Member For: 15y 3m 3d Gender: Male Location: Townsville Posted 03/02/13 08:34 AM Posted 03/02/13 08:34 AM Not sure about more noise but definitely more flow, can be up to 10kw, post on here somewhere about it.Not hard to do yourself if you have a couple of hours and 4"grinder with half worn cutting disc I have Xforce twin 2.5" in mild steel and its not too bad, a bit quieter than the 3.5/ 4" singles apparently.Plenty of topics in here about pros cons of different sizes/material etc.
michaelr New Member 8 Member For: 15y 5m 22d Posted 03/02/13 09:53 AM Posted 03/02/13 09:53 AM Mate I have an xforce twin 2 1/2" with a 4 inch dump on a 2011 fg ute. Sounds great as well .
XRSEXT Member 235 Member For: 14y 2m 5d Gender: Male Posted 03/02/13 09:33 PM Posted 03/02/13 09:33 PM no clip but I will try and post one up.. it cost me $1900 fitted in stainless it was $1700 but I got twin tips twice the size of the standard Xforce ones so it cost a little more
cam69 Member 18 Member For: 13y 8m 2d Posted 03/02/13 10:50 PM Author Posted 03/02/13 10:50 PM I phoned up Cromer Exhaust and they have never heard of this ring, they have done plenty of Territories, anyone have more info or even a diagram. I live on the northern beaches in sydney so shops are few and far between locally.
spinr33 Legacy Donating Member 964 Member For: 15y 1m 15d Posted 03/02/13 11:07 PM Posted 03/02/13 11:07 PM Have alook through this thread matehttp://www.fordxr6turbo.com/forum/topic/80710-fg-restrictor-ring/?hl=%2Bexhaust+%2Bring#entry1309867
JETURBO ...JD TUNING ADELAIDE... Legacy Donating Member 23,708 Member For: 18y 4m 1d Gender: Male Location: Adelaide Posted 04/02/13 12:55 AM Posted 04/02/13 12:55 AM Mate low end exhaust shops are shocking with knowledge of new flacons especially xr6t's Go to a site sponsor for a exhaust and custom tune Best money u will spend and usually they can get xforce stuff really cheap 1
cam69 Member 18 Member For: 13y 8m 2d Posted 04/02/13 01:34 AM Author Posted 04/02/13 01:34 AM Have alook through this thread matehttp://www.fordxr6turbo.com/forum/topic/80710-fg-restrictor-ring/?hl=%2Bexhaust+%2Bring#entry1309867Excellent find dude, much appreciated.Thinking about taking the trip out to Autotech Engineering, they seem to know their business.
JETURBO ...JD TUNING ADELAIDE... Legacy Donating Member 23,708 Member For: 18y 4m 1d Gender: Male Location: Adelaide Posted 04/02/13 01:36 AM Posted 04/02/13 01:36 AM Good choice
XRSEXT Member 235 Member For: 14y 2m 5d Gender: Male Posted 04/02/13 04:35 AM Posted 04/02/13 04:35 AM go to CMS mate dw about any other tuner.. get the xforce exhaust and buy it through an exhaust shop and get them to fit it as I could have got the xforce myself through xforce with 30% discount and it ended up more expensive then going through an exhaust shop to start with..
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now